2902022 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902022 Product Details

• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Number of inputs
  1
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Limit frequency (3 dB)
  approx. 30 Hz
• Electromagnetic compatibility
  Conformance with EMC directive
• Mounting position
  any
• Maximum altitude
  ≤ 2000 m
• Configurable/programmable
  no
• Max. output current
  22 mA
• Power consumption
  ≤ 800 mW (at 9.6 V DC)
• Connection method
  Screw connection
• Conductor cross section AWG
  24 ... 12 (flexible)
• Height
  109.81 mm
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Degree of protection
  IP20 (not assessed by UL)
• Current output signal
  0 mA ... 20 mA
• Ripple
  < 20 mVPP (at 600 Ω)
• Stripping length
  10 mm
• Torque
  0.5 Nm ... 0.6 Nm
• Step response (10-90%)
  approx. 10 ms
Rated insulation voltage
300 V (effective)
Noise emission
EN 61000-6-4
Standards/regulations
EN 61000-4-6
Humidity
B
Vibration
A
ECLASS 4.1
27210100
ECLASS 7.0
27210120
UNSPSC 6.01
30211502
UNSPSC 18.0
39121008
Depth
119.2 mm
Voltage input signal
0 V ... 10 V
Number of outputs
1
Nominal supply voltage
24 V DC
Screw thread
M3
Maximum transmission error
0.1 % (of final value)
Degree of pollution
2
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Designation
Shipbuilding approval
Certificate
DNV GL TAA00002UA
ECLASS 11.0
27210120
Input resistance of voltage input
approx. 1 MΩ
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Temperature coefficient, typical
0.01 %/K
Protective circuit
Transient protection
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Width
6.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Load/output load current output
≤ 600 Ω (at 20 mA)
Typical current consumption
25 mA (24 V DC)
No. of channels
1
Overvoltage category
II
Temperature
B
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210100
ECLASS 6.0
27210100
UNSPSC 7.0901
39121004
UNSPSC 13.2
39121008
UNSPSC 21.0
39121008
Maximum temperature coefficient
0.01 %/K
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Identification
UL 508 Listed
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 10.0.1
27210120
ETIM 4.0
EC002653
ETIM 7.0
EC002653
EMC
A
UNSPSC 11
39121004
UNSPSC 19.0
39121008
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27210120
ECLASS 5.0
27210100
ECLASS 5.1
27210100
ETIM 6.0
EC002653
UNSPSC 12.01
39121004
UNSPSC 20.0
39121008

Product condition