2902021 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902021 Product Details

• Typical current consumption
  25 mA (Current output, at 24 V DC incl. load)
• Degree of pollution
  2
• Height
  109.81 mm
• Humidity
  B
• Degree of protection
  IP20 (not assessed by UL)
• Voltage input signal
  -50 mV ... 50 mV (via DIP switch)
• Number of outputs
  1
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• max. input voltage
  33 V
• Short-circuit current
  < 32 mA
• Ripple
  < 20 mVPP (at 600 Ω)
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Noise emission
  EN 61000-6-4
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 2
• Standards/regulations
  EN 61000-4-6
• Width
  6.2 mm
• Number of inputs
  1
• UNSPSC 21.0
  39121008
• Current output signal
  0 mA ... 20 mA (via DIP switch)
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
Depth
119.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Ambient temperature (operation)
-40 °C ... 70 °C
EMC
A
Connection method
Push-in connection
Limit frequency (3 dB)
30 Hz (via DIP switch)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Power consumption
≤ 800 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
Maximum transmission error
≤ 0.1 % (of final value)
Protective circuit
Transient protection
Color
gray
UNSPSC 7.0901
39121004
UNSPSC 12.01
39121004
Overvoltage category
II
Step response (10-90%)
< 8.5 ms (with 30 Hz filter)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Input resistance of voltage input
> 10 kΩ
Stripping length
10 mm
No. of channels
1
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Vibration
A
ECLASS 10.0.1
27210120
ECLASS 4.0
27210100
ECLASS 5.1
27210100
ETIM 4.0
EC002653
Configurable/programmable
Yes
Max. output current
22 mA
Load/output load voltage output
≥ 10 kΩ
Conductor cross section AWG
24 ... 12 (flexible)
Rated insulation voltage
300 V
Mounting position
any
Designation
Shipbuilding approval
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210120
ECLASS 6.0
27210100
ETIM 6.0
EC002653
UNSPSC 19.0
39121008
Voltage output signal
0 V ... 5 V (via DIP switch)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Temperature
B
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27210120
ETIM 7.0
EC002653
UNSPSC 6.01
30211502
UNSPSC 20.0
39121008
UNSPSC 18.0
39121008
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Nominal supply voltage
24 V DC
Maximum temperature coefficient
0.01 %/K
Electromagnetic compatibility
Conformance with EMC directive
Certificate
DNV GL TAA00002UA
Identification
UL 508 Listed
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27210100
ECLASS 5.0
27210100
ECLASS 9.0
27210120
UNSPSC 11
39121004
UNSPSC 13.2
39121008

Product condition