2902003 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902003 Product Details

• ETIM 6.0
  EC002653
• UNSPSC 11
  39121004
• UNSPSC 12.01
  39121004
• Width
  6.2 mm
• Depth
  119.2 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Configurable/programmable
  no
• Input resistance current input
  approx. 63 Ω (+0.7 V for test diode)
• Number of outputs
  1
• Ripple
  < 20 mVPP (at 10 kΩ)
• Nominal supply voltage
  24 V DC
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Conductor cross section AWG
  24 ... 12 (flexible)
• Maximum transmission error
  0.1 % (of final value)
• Protective circuit
  Transient protection
• Electrical isolation
  Reinforced insulation in accordance with IEC 61010-1
• Test voltage, input/output/supply
  3 kV (50 Hz, 1 min.)
• Housing material
  PBT
• Mounting position
  any
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
Certificate
DNV GL TAA00002UA
Vibration
A
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210120
ECLASS 4.1
27210100
ECLASS 5.1
27210100
UNSPSC 6.01
30211502
UNSPSC 13.2
39121008
UNSPSC 21.0
39121008
UNSPSC 18.0
39121008
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20 (not assessed by UL)
Number of inputs
1
Current input signal
4 mA ... 20 mA
Max. output voltage
11 V
Short-circuit current
< 15 mA
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Temperature coefficient, typical
0.01 %/K
Limit frequency (3 dB)
approx. 30 Hz
Overvoltage category
II
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Designation
Shipbuilding approval
Standards/regulations
EN 61000-4-6
Temperature
B
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27210100
ECLASS 7.0
27210120
ECLASS 9.0
27210120
ETIM 7.0
EC002653
UNSPSC 19.0
39121008
Height
109.81 mm
Ambient temperature (operation)
-40 °C ... 70 °C
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Voltage output signal
0 V ... 10 V
Load/output load voltage output
≥ 10 kΩ
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Typical current consumption
25 mA (24 V DC)
Power consumption
≤ 200 mW (at 9.6 V DC)
No. of channels
1
Maximum temperature coefficient
0.01 %/K
Step response (10-90%)
approx. 10 ms
Degree of pollution
2
Rated insulation voltage
300 V (effective)
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Identification
UL 508 Listed
Humidity
B
EMC
A
ECLASS 10.0.1
27210120
ECLASS 4.0
27210100
ECLASS 6.0
27210100
ETIM 4.0
EC002653
UNSPSC 7.0901
39121004
UNSPSC 20.0
39121008

Product condition