2902002 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902002
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 4 ... 20 mA, output signal: 0 ... 10 V, screw connection technology
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2902002 Phoenix Contact price in the box on the right side or send a quick quote.
2902002 Product Details
- Width 6.2 mm
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Number of outputs 1
- Ripple < 20 mVPP (at 10 kΩ)
- Power consumption ≤ 200 mW (at 9.6 V DC)
- Screw thread M3
- Conductor cross section AWG 24 ... 12 (flexible)
- Maximum temperature coefficient 0.01 %/K
- Degree of pollution 2
- Noise emission EN 61000-6-4
- Mounting position any
- Certificate DNV GL TAA00002UA
- EMC A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 5.0 27210100
- ECLASS 7.0 27210120
- ETIM 6.0 EC002653
- UNSPSC 6.01 30211502
- UNSPSC 20.0 39121008
- Height 109.81 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Input resistance current input approx. 63 Ω (+0.7 V for test diode)
- Voltage output signal 0 V ... 10 V
- Connection method Screw connection
- Maximum transmission error 0.1 % (of final value)
- Protective circuit Transient protection
- Rated insulation voltage 300 V (effective)
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Standards/regulations EN 61000-4-6
- Humidity B
- ECLASS 10.0.1 27210120
- ECLASS 9.0 27210120
- UNSPSC 12.01 39121004
- UNSPSC 18.0 39121008
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Maximum altitude ≤ 2000 m
- Current input signal 4 mA ... 20 mA
- Nominal supply voltage 24 V DC
- Typical current consumption 25 mA (24 V DC)
- Torque 0.5 Nm ... 0.6 Nm
- Limit frequency (3 dB) approx. 30 Hz
- Step response (10-90%) approx. 10 ms
- Housing material PBT
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Temperature B
- ECLASS 4.1 27210100
- ETIM 4.0 EC002653
- UNSPSC 13.2 39121008
- UNSPSC 7.0901 39121004
- Depth 119.2 mm
- Degree of protection IP20 (not assessed by UL)
- Configurable/programmable no
- Load/output load voltage output ≥ 10 kΩ
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- No. of channels 1
- Overvoltage category II
- Color gray
- Identification UL 508 Listed
- Vibration A
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 11.0 27210120
- ECLASS 5.1 27210100
- UNSPSC 11 39121004
- UNSPSC 21.0 39121008
- Ambient temperature (operation) -40 °C ... 70 °C
- Number of inputs 1
- Max. output voltage 11 V
- Short-circuit current < 15 mA
- Stripping length 10 mm
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- Temperature coefficient, typical 0.01 %/K
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Electromagnetic compatibility Conformance with EMC directive
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Designation Shipbuilding approval
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27210100
- ECLASS 6.0 27210100
- ETIM 7.0 EC002653
- UNSPSC 19.0 39121008
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨