2902000 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902000 Product Details

• Ambient temperature (operation)
  -40 °C ... 70 °C
• Number of inputs
  1
• Number of outputs
  1
• Nominal supply voltage
  24 V DC
• Typical current consumption
  25 mA (24 V DC)
• Maximum temperature coefficient
  0.01 %/K
• Maximum transmission error
  0.1 % (of final value)
• Electromagnetic compatibility
  Conformance with EMC directive
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Maximum altitude
  ≤ 2000 m
• Configurable/programmable
  no
• Load/output load voltage output
  ≥ 10 kΩ
• Power consumption
  ≤ 200 mW (at 9.6 V DC)
• Screw thread
  M3
• Conductor cross section AWG
  24 ... 12 (flexible)
• Electrical isolation
  Reinforced insulation in accordance with IEC 61010-1
• Overvoltage category
  II
• Color
  gray
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• Humidity
  B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 4.1
27210100
ECLASS 5.0
27210100
UNSPSC 12.01
39121004
Width
6.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Current input signal
0 mA ... 20 mA
Ripple
< 20 mVPP (at 10 kΩ)
Stripping length
10 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Temperature coefficient, typical
0.01 %/K
Degree of pollution
2
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Certificate
DNV GL TAA00002UA
Vibration
A
ECLASS 11.0
27210120
ETIM 4.0
EC002653
ETIM 6.0
EC002653
UNSPSC 13.2
39121008
UNSPSC 21.0
39121008
Depth
119.2 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Voltage output signal
0 V ... 10 V
Short-circuit current
< 15 mA
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Torque
0.5 Nm ... 0.6 Nm
Limit frequency (3 dB)
approx. 30 Hz
Rated insulation voltage
300 V (effective)
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27210100
ECLASS 7.0
27210120
UNSPSC 7.0901
39121004
UNSPSC 18.0
39121008
Height
109.81 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20 (not assessed by UL)
Input resistance current input
approx. 63 Ω (+0.7 V for test diode)
Max. output voltage
11 V
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Connection method
Screw connection
No. of channels
1
Step response (10-90%)
approx. 10 ms
Protective circuit
Transient protection
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Designation
Shipbuilding approval
Temperature
B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27210100
ECLASS 9.0
27210120
UNSPSC 11
39121004
UNSPSC 19.0
39121008
Noise emission
EN 61000-6-4
Identification
UL 508 Listed
EMC
A
ECLASS 10.0.1
27210120
ECLASS 5.1
27210100
UNSPSC 6.01
30211502
ETIM 7.0
EC002653
UNSPSC 20.0
39121008

Product condition