2866653 Phoenix Contact Electrical Measuring & Monitoring Instruments

2866653 Product Details

• Depth
  95 mm
• Nominal input voltage range
  100 V AC ... 240 V AC
• Inrush current
  < 15 A (typical)
• POWER BOOST (IBoost)
  2 A (-25°C ... 40°C)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Width
  35 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Nominal power consumption
  88 VA
• Feedback voltage resistance
  35 V DC
• Residual ripple
  < 40 mVPP (with nominal values)
• Height
  99 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• AC frequency range
  45 Hz ... 65 Hz
• Mains buffering time
  typ. 35 ms (120 V AC)
• Net weight
  0.25 kg
• Max. permissible relative humidity (operation)
  100 % (condensation permitted)
• Current consumption
  0.75 A (120 V AC)
• Input fuse
  3.15 A (slow-blow, internal)
• Typical response time
  < 0.5 s
REACh SVHC
Lead 7439-92-1
Input voltage range
85 V AC ... 264 V AC
Nominal output current (IN)
1.5 A (-25 °C ... 60 °C)
ETIM 6.0
EC002540
UNSPSC 12.01
39121004
UNSPSC 19.0
39121004
Installation distance right/left
0 mm / 0 mm
Recommended breaker for input protection
6 A ... 16 A (AC: Characteristics B, C, D, K)
Output power
36 W
Power loss nominal load max.
6.5 W
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section AWG min.
24
MTBF (IEC 61709, SN 29500)
> 2789000 h (40 °C)
Protection class
II (in closed control cabinet)
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
2.5 mm²
Standard – Safety extra-low voltage
EN 60950-1 (SELV) and EN 60204-1 (PELV)
Standards/regulations
EN 60079-0
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27049000
ECLASS 9.0
27040701
UNSPSC 21.0
39121004
Nominal output voltage
24 V DC ±1 %
Peak switching voltages nominal load
< 20 mVPP (20 MHz)
Connection method
Pluggable screw connection
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.5 mm²
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
UL approvals
UL/C-UL listed UL 508
ECLASS 4.1
27040700
ETIM 4.0
EC000599
ETIM 2.0
EC001039
UNSPSC 6.01
30211502
UNSPSC 20.0
39121004
Installation distance top/bottom
50 mm / 50 mm
Derating
60 °C ... 70 °C (2.5%/K)
Efficiency
> 84 % (for 230 V AC and nominal values)
Insulation voltage input / PE
4 kV AC (type test)
Conductor cross section AWG max.
12
EMC requirements for noise immunity
EN 61000-6-1
Standard - Safe isolation
DIN VDE 0100-410
ECLASS 5.1
27049000
ECLASS 7.0
27049002
ETIM 3.0
EC001039
UNSPSC 7.0901
39121004
UNSPSC 11
39121004
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Connection in series
yes
Maximum power dissipation in no-load condition
1.5 W
Insulation voltage input/output
4 kV AC (type test)
Screw thread
M4
EMC requirements for noise emission
EN 61000-6-3
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Rail applications
EN 50121-4
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
ECLASS 4.0
27040700
ECLASS 10.0.1
27040701
ECLASS 6.0
27049000
ETIM 7.0
EC002540
UNSPSC 18.0
39121004
UNSPSC 13.2
39121004

Product condition