2865489 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2865489
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2865489 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Switching points (attenuated) < 1.2 mA (blocking)
- UL, USA/Canada Class I Div 2; IS for Class I, II, III Div 1
- Humidity B
- EMC B
- ECLASS 11.0 27210121
- Short-circuit current ~ 8 mA
- Line fault detection Break 0.05 mA < IIN < 0.35 mA
- Max. switching current 50 mA (short-circuit-proof)
- Stripping length 7 mm
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Degree of pollution 2
- Color gray
- Interference emission EN 61000-6-4
- Max. output voltage Uo 9.6 V
- Max. output power Po 25 mW
- Evaluation criterion A
- ATEX II (1) G [Ex ia Ga] IIC
- Maximum switching voltage 30 V DC
- Power dissipation ≤ 1000 mW
- Switching frequency ≤ 5 kHz
- Torque 0.5 Nm ... 0.6 Nm
- Designation INMETRO
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
- Noise immunity EN 61000-6-2
- Switching output 1 transistor output, passive (per channel)
- Group IIC
- Additional text and EN 61326
- IECEx [Ex ia Ga] IIC
- DNV GL-EMC B
- Temperature B
- Degree of protection IP20 (not assessed by UL)
- Minimum switching voltage 3 V DC
- Power consumption 0.8 W
- No. of channels 2
- Overvoltage category II
- Width 12.5 mm
- Max. current consumption < 34 mA (24 V DC)
- Test voltage 1 kV AC (50 Hz, 1 min.)
- Max. internal inductance Li negligible
- Nominal supply voltage 24 V DC
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Status display Green LED (supply voltage)
- Signal input Intrinsically safe
- Switching hysteresis < 0.2 mA
- Rated insulation voltage 50 Vrms
- Safety Integrity Level (SIL) 2
- Identification [Ex ia Ga] IIC
- Min. contact current 5 mA (short-circuit-proof)
- Connection method Screw connection
- Housing material PA 6.6-FR
- Conductor cross section AWG 24 ... 14
- Non-load voltage ~ 8 V DC
- Supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
- Electromagnetic compatibility Conformance with EMC directive
- Max. internal capacitance Ci 1.1 nF
- UNSPSC 6.01 30211506
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Height 112.5 mm
- UNSPSC 19.0 39121008
- Available input sources NAMUR proximity sensors (EN 60947-5-6)
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Depth 114.5 mm
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Permissible humidity (operation) 10 % ... 95 % (non-condensing)
- Switching points (unattenuated) > 2.1 mA (conductive)
- ETIM 2.0 EC001485
- Maximum altitude ≤ 2000 m
- Screw thread M3
- Insulation Basic insulation in accordance with IEC/EN 61010-1
- Conformance CE-compliant, additionally EN 61326
- Safety-related maximum voltage Um 253 V AC (125 V DC)
- Standards/regulations GB 3626.20
- DNV GL-Temperature B
- DNV GL-Vibration A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27210100
- ECLASS 6.0 27210100
- UNSPSC 18.0 39121008
- Max. output current Io 10 mA
- Noise emission EN 61000-6-4
- ECLASS 4.0 27210100
- ECLASS 9.0 27210121
- ETIM 3.0 EC001485
- UNSPSC 11 39121008
- UNSPSC 12.01 39121008
- Max. external inductivity Lo 10 µH
- Vibration A
- ECLASS 4.1 27210100
- ETIM 4.0 EC001485
- UNSPSC 7.0901 39121008
- UNSPSC 21.0 39121008
- Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position)
- Max. external capacitance Co 1 µF
- DNV GL-Humidity B
- ECLASS 10.0.1 27210121
- ECLASS 7.0 27210121
- UNSPSC 13.2 39121008
- Certificate DNV 18.0141 X
- REACh SVHC Lead 7439-92-1
- ECLASS 5.1 27210100
- ETIM 6.0 EC001485
- ETIM 7.0 EC001485
- UNSPSC 20.0 39121008
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
