Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2865984 Phoenix Contact Electrical Measuring & Monitoring Instruments

Phoenix Contact 2865984 2-channel Ex i NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Fault detection (LFD), 3-way isolation, SIL 2.
Phoenix Contact

Part#:2865984

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: 2-channel Ex i NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Fault detection (LFD), 3-way isolation, SIL 2.

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2865984 Phoenix Contact price in the box on the right side or send a quick quote.

2865984 Product Details

  • Height
    112.5 mm
  • Maximum altitude
    ≤ 2000 m
  • Switching points (attenuated)
    < 1.2 mA (blocking)
  • Available input sources
    NAMUR proximity sensors (EN 60947-5-6)
  • Contact material
    AgSnO2, hard gold-plated
  • Switching frequency
    ≤ 20 Hz (Load-dependent)
  • Power consumption
    ≤ 1.3 W
  • Status display
    Green LED (supply voltage, PWR)
  • Electrical isolation
    375 V (Peak value in accordance with IEC/EN 60079-11)
  • Designation
    EAC Ex
  • Ambient temperature (operation)
    -20 °C ... 60 °C
  • Noise immunity
    EN 61000-6-2
  • Line fault detection
    Break 0.05 mA < IIN < 0.35 mA
  • Switching output
    Relay output
  • Power dissipation
    ≤ 1.3 W
  • Torque
    0.5 Nm ... 0.6 Nm
  • No. of channels
    2
  • Overvoltage category
    III
  • Safety Integrity Level (SIL)
    2
  • Max. output power Po
    25 mW
  • Additional text
    and EN 61326
  • Standards/regulations
    GB 3626.20
  • ATEX
     II (1) G [Ex ia Ga] IIC
  • DNV GL-EMC
    A
  • Humidity
    B
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.1
    27210100
  • ECLASS 5.1
    27210100
  • ETIM 2.0
    EC001485
  • ETIM 7.0
    EC001485
  • UNSPSC 11
    39121008
  • UNSPSC 20.0
    39121008
  • Width
    17.5 mm
  • Permissible humidity (operation)
    10 % ... 95 % (non-condensing)
  • Switching points (unattenuated)
    > 2.1 mA (conductive)
  • Short-circuit current
    ~ 8 mA
  • Maximum switching voltage
    250 V AC (2 A, 60 Hz)
  • Maximum switching capacity
    500 VA
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm²
  • Connection method
    Screw connection
  • Electromagnetic compatibility
    Conformance with EMC directive
  • Degree of pollution
    2
  • Max. internal capacitance Ci
    11 nF
  • Max. output current Io
    10.3 mA
  • Safety-related maximum voltage Um
    253 V AC/DC (Supply terminals)
  • IECEx
    [Ex ia Ga] IIC
  • DNV GL-Humidity
    B
  • Temperature
    B
  • ECLASS 11.0
    27210121
  • ECLASS 9.0
    27210121
  • UNSPSC 7.0901
    39121008
  • Depth
    114.5 mm
  • Non-load voltage
    ~ 8 V DC
  • Signal input
    Intrinsically safe
  • Contact type
    1 changeover contact per channel
  • Mechanical service life
    107 cycles
  • Stripping length
    7 mm
  • Conductor cross section AWG
    24 ... 14
  • Color
    gray
  • Housing material
    PA 6.6-FR
  • Rated insulation voltage
    300 Vrms
  • Max. internal inductance Li
    negligible
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (storage/transport)
    -40 °C ... 80 °C
  • Degree of protection
    IP20 (not assessed by UL)
  • Switching hysteresis
    < 0.2 mA
  • Supply voltage range
    24 V ... 230 V AC/DC (-20 % ... +10 %, 50 Hz ... 60 Hz)
  • Max. current consumption
    < 80 mA
  • Conductor cross section flexible
    0.2 mm² ... 2.5 mm²
  • Interference emission
    EN 61000-6-4
  • Step response (10-90%)
    typ. 6 ms (N/O contact: OFF/ON)
  • Test voltage
    2.5 kV AC (50 Hz, 1 min.)
  • Insulation
    Safe isolation in accordance with IEC/EN 61010-1
  • Max. external inductivity Lo
    10 µH
  • Noise emission
    EN 61000-6-4
  • DNV GL-Temperature
    B
  • DNV GL-Enclosure
    Required protection according to the Rules shall be provided upon installation on board
  • Vibration
    A
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.0
    27210100
  • Conformance
    CE-compliant, additionally EN 61326
  • UNSPSC 13.2
    39121008
  • UNSPSC 21.0
    39121008
  • Evaluation criterion
    A
  • UL, USA/Canada
    Class I Div 2; IS for Class I, II, III Div 1
  • Enclosure
    Required protection according to the Rules shall be provided upon installation on board
  • ECLASS 5.0
    27210100
  • ECLASS 7.0
    27210121
  • UNSPSC 12.01
    39121008
  • Identification
     [Ex ia Ga] IIC
  • EMC
    A
  • ECLASS 10.0.1
    27210121
  • Max. output voltage Uo
    9.56 V
  • Group
    IIC
  • ETIM 4.0
    EC001485
  • ETIM 6.0
    EC001485
  • UNSPSC 19.0
    39121008
  • Max. external capacitance Co
    1 µF
  • DNV GL-Vibration
    A
  • Certificate
    RU C-DE.AB72.B.00093/19
  • ECLASS 6.0
    27210100
  • ETIM 3.0
    EC001485
  • UNSPSC 6.01
    30211506
  • UNSPSC 18.0
    39121008

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo