2865340 Phoenix Contact Electrical Measuring & Monitoring Instruments

2865340 Product Details

• Transmitter supply voltage
  > 16 V (20 mA)
• Voltage drop
  < 3.5 V (in input isolating amplifier operation)
• Nominal supply voltage
  24 V DC
• Conductor cross section AWG
  24 ... 14
• Maximum transmission error
  < 0.1 % (of final value)
• Temperature coefficient, typical
  < 0.004 %/K
• Overvoltage category
  II
• Polarization and surge protection
  Yes
• Current output signal
  0 mA ... 20 mA (active)
• λDU
  5 x 10-8 (50 FIT)
• Diagnostic coverage (DC)
  DCS=0 %, DCD=0 %
• Max. output voltage Uo
  25.2 V
• Max. external capacitance Co
  820 nF
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• No. of channels
  1
• Step response (10-90%)
  < 200 µs (for jump 4 mA ... 20 mA, load 600 Ω)
• Interference emission
  EN 61000-6-4
• Test voltage
  2.5 kV AC (50 Hz, 1 min.)
• Integrity requirement
  IEC 61508 - High demand
Input voltage Ui
≤ 30 V
Standards/regulations
GB 3626.20
UL, USA/Canada
UL 61010 Listed
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Humidity
B
Height
112.5 mm
Maximum altitude
≤ 2000 m
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Underload/overload signal range
0 mA ... 24 mA (Extended transmission range for diagnostics)
Transmission Behavior
1:1 to input signal
Output ripple
< 20 mVrms
Load/output load current output
< 1000 Ω (20 mA)
Torque
0.5 Nm ... 0.6 Nm
Transmission error, typical
< 0.05 % (of final value)
Degree of pollution
2
Power consumption
< 1.8 W (20 mA / 1000 Ω)
Connection name
Test socket
Current input signal
0 mA ... 20 mA
Width
12.5 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Depth
114.5 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Supply voltage range
19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
Power dissipation
< 0.75 W (24 V DC / 20 mA / 1000 Ω)
Connection method
Screw connection
Nominal supply voltage range
19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
Stripping length
7 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Max. diameter
2 mm
Electromagnetic compatibility
Conformance with EMC directive
Color
gray
Protocols supported
HART
Safety Integrity Level (SIL)
2
Signal output
Current output (active and passive)
Designation
INMETRO
Maximum temperature coefficient
< 0.01 %/K
Electrical isolation
375 V (Peak value in accordance with IEC/EN 60079-11)
Equipment type
Type A
λSD
0
Operation
Signal conditioner operation
Group
IIC
Input current Ii
≤ 150 mA
Max. internal capacitance Ci
negligible
Noise emission
EN 61000-6-4
DNV GL-Vibration
A
Identification
[Ex ia Ga] IIC/IIB
EMC
A
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 4.1
27210100
ECLASS 6.0
27210100
ECLASS 7.0
27210120
ETIM 6.0
EC002653
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008
Degree of protection
IP20 (not assessed by UL)
Max. current consumption
< 44 mA (24 V DC / 20 mA / 1000 Ω)
Screw thread
M3
Status display
Green LED (supply voltage)
HART function
Yes
Safe Failure Fraction (SFF)
90.7 %
Probability of a hazardous failure per hour (PFHD)
4,99 x 10-8
Additional text
and EN 61326
Max. internal inductance Li
negligible
DNV GL-Temperature
B
DNV GL-EMC
A
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27210120
ECLASS 5.0
27210100
ETIM 4.0
EC002653
UNSPSC 6.01
30211506
UNSPSC 21.0
39121008
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Signal input
Passive current input, intrinsically safe
Output behavior in the event of an error
0 mA (Cable break in the input)
Housing material
PA 6.6-FR
Rated insulation voltage
300 Vrms
Insulation
Safe isolation in accordance with IEC/EN 61010-1
λDD
0
Max. output power Po
587 mW
Safety-related maximum voltage Um
253 V AC (125 V DC)
ATEX
 II (1) G [Ex ia Ga] IIC
DNV GL-Humidity
B
Temperature
B
Vibration
A
ECLASS 11.0
27210120
ECLASS 5.1
27210100
ETIM 7.0
EC002653
UNSPSC 11
39121008
UNSPSC 18.0
39121008
λSU
4.867 x 10-7 (486.7 FIT)
Probability of a hazardous failure on demand (PFDAVG)
2.40 x 10-4 (1 year)
Max. output current Io
93 mA
Max. external inductivity Lo
4 mH
Typical deviation from the measuring range final value
1 %
Conformance
CE-compliant, additionally EN 61326
IECEx
[Ex ia Ga] IIC
Certificate
DNV 18.0136 X
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27210100
ECLASS 9.0
27210120
UNSPSC 7.0901
39121008
UNSPSC 12.01
39121008
UNSPSC 19.0
39121008

Product condition