2791388 Phoenix Contact Terminal Blocks

2791388 Product Details

• Number of connections
  4
• Insulating material
  PA
• Insulating material group
  I
• Nominal voltage UN
  500 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/7,5
  62 mm
• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• Maximum load current
  32 A (with 4 mm² conductor cross section)
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Setpoint
  1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
2.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Number of levels
2
Overvoltage category
III
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Height NS 32
67 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
Color
gray
Degree of pollution
3
Connection in acc. with standard
CUL
Back of the hand protection
guaranteed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Short-time current
0.48 kA
ASD level
6.12 (m/s2)2/Hz
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
69.5 mm
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Cross section with insertion bridge, solid max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque max
0.8 Nm
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Rated surge voltage
6 kV
Nominal current IN
32 A
Result of surge voltage test
Test passed
Tight fit on carrier
NS 32/NS 35
Conductor cross section short circuit testing
4 mm²
Shock form
Half-sine
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
56 mm
Conductor cross section flexible max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Stripping length
8 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Tightening torque, min
0.6 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27141100
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Screw thread
M3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410

Product condition