2791016 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Overvoltage category
  III
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  2.5 kV
• Tensile test result
  Test passed
• Tractive force setpoint
  60 N
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  500 V (Data is based on the dielectric strength of adjacent terminal blocks or of the DINg rail.)
• Finger protection
  guaranteed
• Bending test turns
  135
• Requirements, voltage drop
  ≤ 3.2 mV
• Short-time current
  0.48 kA
• Proof of thermal characteristics (needle flame) effective duration
  10 s
• Height NS 35/7,5
  62 mm
Color
gray
Nominal current IN
32 A (The nominal current of the diode is 1 A)
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.5 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Cross section with insertion bridge, solid max.
4 mm²
Tightening torque, min
0.6 Nm
Connection in acc. with standard
CUL
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Rated surge voltage
6 kV
Maximum load current
32 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 32/NS 35
Setpoint
1 N
Short circuit stability result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
56 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Tightening torque max
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141127
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141127
UNSPSC 12.01
39121410
Number of levels
2
Degree of pollution
3
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
4 mm²
Conductor cross section short circuit testing
4 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
69.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A4
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Height NS 32
67 mm
Conductor cross section flexible max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Connection method
Screw connection
Screw thread
M3
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000903
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Stripping length
8 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141127
ECLASS 7.0
27141127
ETIM 7.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410