2716062 Phoenix Contact Terminal Blocks

Product Details

• Length
  22 mm
• Conductor cross section solid min.
  0.2 mm²
• Min. AWG conductor cross section, flexible
  24
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 10.0.1
  27141120
• Insulating material
  PA
• Overvoltage category
  III
• Nominal current IN
  32 A
• Nominal voltage UN
  500 V
• Back of the hand protection
  guaranteed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Result of temperature-rise test
  Test passed
• Short-time current
  0.48 kA
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Conductor cross section short circuit testing
  4 mm²
• Surface flammability NFPA 130 (ASTM E 162)
  passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Tightening torque max
0.8 Nm
Conductor cross section flexible min.
0.2 mm²
Potentials
6
Maximum power dissipation for nominal condition
1.02 W
Open side panel
No
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ETIM 4.0
EC001284
ETIM 7.0
EC001284
UNSPSC 12.01
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Screw thread
M3
Stripping length
8 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC001284
ETIM 3.0
EC001284
UNSPSC 21.0
39121410
Number of levels
1
Nominal cross section
4 mm²
Rated surge voltage
6 kV
Maximum load current
32 A (with 4 mm² conductor cross section)
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
52 mm
Height
24 mm
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141106
UNSPSC 6.01
30211811
UNSPSC 13.2
39121409
Number of positions
6
Color
gray
Degree of pollution
3
Terminal block mounting
When attaching the product to the mounting surface, please ensure that the housing is not damaged when tightening the center screw
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Tightening torque, min
0.6 Nm
Connection in acc. with standard
CSA
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid min.
0.2 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC001284
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410
Number of connections
12
Flammability rating according to UL 94
V0
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test rotation speed
10 rpm
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 19.0
39121410