2716020 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.02 W
• Degree of pollution
  3
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  22 mm
• Potentials
  2
• Rated surge voltage
  6 kV
• Nominal current IN
  32 A
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
• Result of thermal test
  Test passed
• Screw thread
  M3
• Conductor cross section solid min.
  0.2 mm²
Number of positions
2
Color
gray
Flammability rating according to UL 94
V0
Nominal voltage UN
500 V
Shock protection test specification
IEC 60529:2001-02
Back of the hand protection
guaranteed
Bending test turns
135
Short-time current
0.48 kA
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Connection method
Screw connection
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
12
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of levels
1
Nominal cross section
4 mm²
Insulating material group
I
Maximum load current
32 A (with 4 mm² conductor cross section)
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Conductor cross section short circuit testing
4 mm²
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
20 mm
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
24 mm
Stripping length
8 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A3
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
Tightening torque, min
0.6 Nm
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ETIM 2.0
EC001284
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ETIM 6.0
EC001284
ETIM 4.0
EC001284
UNSPSC 18.0
39121410
Result of surge voltage test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection in acc. with standard
CSA
ETIM 3.0
EC001284
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Overvoltage category
III
Static insulating material application in cold
-60 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 11.0
27141120
ECLASS 5.0
27141100
Terminal block mounting
When attaching the product to the mounting surface, please ensure that the housing is not damaged when tightening the center screw
Result of flexion and pull-out test
Test passed
Conductor cross section flexible min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 7.0
EC001284
UNSPSC 13.2
39121409
2 conductors with same cross section, solid max.
1.5 mm²
ECLASS 7.0
27141106
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
ECLASS 5.1
27141100
UNSPSC 19.0
39121410