2702901 Phoenix Contact Data & Networking Devices
Part#:2702901
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Safety relay with IO-Link for emergency stop, safety doors, and light grids, up to SILCL 3, Cat. 4, PL e, 2 sensor circuits, automatic or manual, monitored start, 2 enabling current paths, 1 signal output, US = 24 V DC, plug-in screw terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2702901 Phoenix Contact price in the box on the right side or send a quick quote.
2702901 Product Details
- Conformance CE-compliant
- Height 112.2 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Rated control supply current IS typ. 60 mA
- Filter time max. 1.5 ms (Test pulse width of low test pulses)
- Current consumption < 5 mA (typically with US at S34/24 V)
- Contact material AgSnO2
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Current max. 100 mA
- Stripping length 7 mm
- Performance level (PL) e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- Restart time < 1 s (Boot time)
- Mounting position vertical or horizontal
- Assembly instructions See derating curve
- pluggable Yes
- Overvoltage category II
- Transmission speed 230 kbps (COM3)
- Connection technology 3-conductor
- Number of outputs 1
- Screw thread M3
- Rated insulation voltage 320 V
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 11.0 27371819
- ETIM 7.0 EC001449
- Output description PNP
- Switching frequency 0.5 Hz
- Output fuse 6 A gL/gG
- Voltage approx. 22 V DC (Us - 2 V)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 114.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Safety Integrity Level (SIL) 3
- Rated surge voltage/insulation Basic insulation 4 kV between all current paths and housing
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27371819
- ETIM 6.0 EC001449
- Designation Air clearances and creepage distances between the power circuits
- Power consumption at US typ. 1.44 W
- Width 17.5 mm
- Ambient temperature (operation) -25 °C ... 60 °C (observe derating)
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Category 4
- ECLASS 5.1 27371901
- ECLASS 6.0 27371819
- Inrush current min. 3 mA
- Stop category 0
- Typical pickup time at US < 250 ms (when controlled via A1)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Safety Integrity Level Claim Limit (SIL CL) 3
- Cycle Time 5 ms
- Output name Enabling current path
- Limiting continuous current 6 A
- Mechanical service life 10x 106 cycles
- Type of protection Serial protection against polarity reversal
- Switching capacity min. 60 mW
- Rated control circuit supply voltage US 24 V DC -20 % / +25 % (provide external protection)
- Nominal voltage for I/O supply 24 V DC -20 % / +25 % (is provided via the IO-Link interface of the IO-Link master.)
- Protective circuit/component Suppressor diode
- Typical response time at US < 220 ms (automatic start)
- Net weight 157.28 g
- Degree of protection IP20
- Operating voltage display 1 x green, yellow, red LED
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Input voltage range "0" signal 0 V DC ... 5 V DC
- Max. permissible overall conductor resistance 150 Ω
- Specification Version 1.1
- Number of ports 1
- Input name C/Q
- Input voltage range "1" signal 19.2 V DC ... 30 V DC (manual start, autostart: 0 V)
- Concurrence ∞
- Input voltage range 0 V DC ... 30 V DC
- Amount of process data max. 31 Byte (Input data)
- Connection method Screw connection
- Switching voltage min. 12 V AC/DC
- Nominal operating mode 100% operating factor
- Status display 5x LED green
- Protective circuit Serial protection against polarity reversal Suppressor diode
- Description of the input IO-Link switching and communication cable
- Number of inputs 1
- Input current range "0" signal 0 mA ... 2 mA
- Process data update 5 ms
- Switching capacity according to IEC 60947-5-1 4 A (24 V (DC13))
- Typical release time at US < 20 ms (on demand via the sensor circuit)
- Housing material PBT
- Mounting type DIN rail mounting
- Conductor cross-section AWG 24 ... 12
- ECLASS 9.0 27371819
- Port type Class A
- Contact type 2 enabling current paths
- Sq. Total current 72 A2 (observe derating)
- Recovery time < 500 ms
- Min. degree of protection of inst. location IP54
- Housing color yellow
- Standards/regulations DIN EN 60947-1
- Shock 15g
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2702901
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨