2702409 Phoenix Contact Data & Networking Devices

2702409 Product Details

• Degree of protection
  IP20
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Interface 3
  USB 2.0
• Standards/regulations
  EN 50121-4
• Frequency range
  0.15 MHz ... 80 MHz
• ECLASS 7.0
  19060590
• ETIM 7.0
  EC000740
• UNSPSC 21.0
  43222628
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Conductor cross section solid max.
  2.5 mm²
• Voltage output signal
  depending on the operating voltage
• Behavior of the outputs
  Deactivated for device supply via DIN rail connector
• Status and diagnostic indicators
  LEDs: US (supply voltage), ACT/LINK (Ethernet data traffic), ERR (errors)2x LINK / 2x STAT (DSL data traffic port A and port B), DIAG (diagnostic messages)
• Designation
  Corrosive gas test
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  19030100
• ETIM 4.0
  EC000740
• Color
  gray
• Max. current consumption
  ≤ 2 A (For operation in a connection station, via the DIN rail connector)
• Conductor cross section flexible max.
  2.5 mm²
Output name
Digital output
Altitude
≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Width
35 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Serial transmission speed
4-wire operation: 64 kbps ... 30 Mbps
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Supply voltage range
18 V DC ... 30 V DC
Connection method
2 x 2-pos. COMBICON plug-in screw terminal blocks
Identification
ISA-S71.04-1985 G3 Harsh Group A
REACh SVHC
Lead 7439-92-1
Comments
Criterion B
ECLASS 9.0
19060590
ECLASS 6.0
19060500
UNSPSC 11
39121008
UNSPSC 18.0
43222628
UNSPSC 20.0
43222628
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Nominal supply voltage
24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply)
Number of outputs
2
Interface
Ethernet
Interface 2
SHDSL interface according to ITU-T G.991.2.bis
Management
Plug and Play, diagnostics via PSI-CONF software or web-based management (only with managed Ethernet extenders)
Current output signal
≤ 150 mA (Short-circuit-proof)
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Contact discharge
± 6 kV
ECLASS 10.0.1
19060590
ECLASS 11.0
19060590
UNSPSC 7.0901
39121008
UNSPSC 13.2
43222628
Interface 1
Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Test result
15g
Additional text
Please follow the special installation instructions in the documentation!
Signal
± 1 kV (asymmetrical, shielded Ethernet cable)
ECLASS 5.1
19030100
ETIM 6.0
EC000740
UNSPSC 12.01
39121008
Housing material
PA 6.6-FR
Net weight
258.7 g
MTTF
711 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
UNSPSC 6.01
30211506
UNSPSC 19.0
43222628
Typical current consumption
< 180 mA (24 V DC)
Protocols supported
Protocol-transparent for TCP/IP, IPv4, and IPv6
Indirect discharge
± 6 kV
No. of ports
2 (2-wire operation)
Ambient temperature (operation)
-20 °C ... 60 °C (Freestanding (40 mm spacing to the right and left), no supply of other modules via the device)
Mounting type
DIN rail: 35 mm
Electrical isolation
VCC // Ethernet // DSL (A) // DSL (B) // FE
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
99 mm
Depth
114.5 mm
Test voltage data interface/power supply
1.5 kV AC (50 Hz, 1 min.)
Transmission length
< 5 m (only for configuration and diagnostics)

Product condition