2702886 Phoenix Contact Data & Networking Devices

2702886 Product Details

• Ambient temperature (storage/transport)
  0 °C ... 60 °C
• Ambient temperature (operation)
  0 °C ... 60 °C
• Degree of protection
  IP20
• Supply voltage range
  10 V DC ... 30 V DC (SELV, via pluggable Push-in terminal block)
• Conductor cross section flexible min.
  0.14 mm²
• No. of ports
  2
• Protocols supported
  TCP/IP, UDP/IP, FTP, HTTP
• Antenna
  50 Ω impedance SMA antenna socket
• LTE
  CAT4
• Security functions
  Supported 3DES, AES-128, -192, -256 ESP tunnel X.509v3, PSK MD5, SHA-1 RFC 3706
• Current output signal
  ≤ 50 mA (Not short-circuit proof)
• Switching level "1" signal
  10 V DC ... 30 V DC
• Standards/regulations
  EN 61000-4-6
• Contact discharge
  ± 6 kV (Test Level 3)
• ECLASS 5.1
  19030100
• ETIM 6.0
  EC001478
• Height
  130 mm
• Noise immunity
  EN 61000-6-2
• Color
  gray
• Max. current consumption
  1.7 A
Conductor cross section AWG max.
16
Interface 1
Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Connection method
RJ45 jack, shielded
Interface description
GSM / GPRS / EDGE / UMTS / HSPA / LTE (FDD)
Country support
Europe
Web-based management
yes
Number of inputs
1
Voltage input signal
10 V DC ... 30 V DC
Comments
Criterion B
ECLASS 11.0
19170502
ECLASS 9.0
19170103
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Mounting type
DIN rail mounting
Net weight
232.8 g
Typical current consumption
< 200 mA (24 V DC)
Interface
Ethernet
Transmission length
100 m (shielded twisted pair)
Frequency range
0.15 MHz ... 80 MHz
UMTS
HSPA 3GPP R9
Management
Web-based management, SNMP
Output name
Digital output
Number of outputs
1
Designation
Corrosive gas test
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
ECLASS 10.0.1
19170502
ECLASS 6.0
19170100
ETIM 7.0
EC001478
Depth
126 mm
Electrical isolation
VCC // LTE // Ethernet // PE
Housing material
Plastic
Conductor cross section flexible max.
1.50 mm²
Conductor cross section solid min.
0.14 mm²
Serial transmission speed
10/100 Mbps, auto negotiation
Data rate
≤ 150 Mbps (LTE (DL))
EDGE
Multislot Class 10
Number of VPN tunnels
1
Description of the input
Digital input
Test result
15g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
19170103
Width
45 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Electromagnetic compatibility
Conformance with RED Directive 2014/53/EU
MTTF
383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Wireless licences
Europe
Conductor cross section solid max.
1.50 mm²
Conductor cross section AWG min.
26
Auxiliary protocols
ARP, DHCP, PING (ICMP), SNMP V1, SMTP
SIM interface 1
1.8 volt, 3 volt
GPRS
Class 12, Class B
Voltage output signal
10 V DC ... 30 V DC (depending on the operating voltage)
Identification
ISA-S71.04-1985 G3 Harsh Group A
Signal
± 1 kV (Data line, asymmetrical)
ECLASS 5.0
19030100

Product condition