2700569 Phoenix Contact Electrical Safety Devices

2700569 Product Details

• Rated control circuit supply voltage US
  24 V DC -15 % / +10 %
• Filter time
  max. 1.5 ms (at S12, S22; test pulse width)
• Description of the input
  non-safety-related
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 55 °C (observe derating)
• Designation
  Air clearances and creepage distances between the power circuits
• Inrush current
  min. 3 mA
• Input voltage range "0" signal
  0 V DC ... 5 V DC (for safe Off; at S12 and S22)
• Current consumption
  < 10 mA (at S34/24 V)
• Output name
  Enabling current paths
• Contact type
  3 enabling current paths
• Switching capacity
  min. 60 mW
• Mechanical service life
  10x 106 cycles
• Current
  max. 100 mA
• Typical response time at US
  < 175 ms (automatic start)
• Min. degree of protection of inst. location
  IP54
• Operating voltage display
  1 x green LED
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Screw thread
  M3
• Safety Integrity Level (SIL)
  3
Safety Integrity Level Claim Limit (SIL CL)
3
ECLASS 11.0
27371819
ECLASS 7.0
27371819
ETIM 6.0
EC001449
UNSPSC 21.0
39122205
Width
12.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Maximum altitude
≤ 2000 m (Above sea level)
Protective circuit
Surge protection Suppressor diode
Input voltage range "1" signal
20.4 V DC ... 26.4 V DC
Number of outputs
1 (digital, PNP)
Limiting continuous current
6 A (observe derating)
Voltage
22 V DC (Us - 2 V)
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Typical release time at US
< 20 ms (when controlled via A1 or S12 and S22.)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Nominal operating mode
100% operating factor
Housing color
yellow
Status display
3 x green LED
Stripping length
7 mm
Performance level (PL)
e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
Standards/regulations
DIN EN 50178
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371900
UNSPSC 18.0
39122205
Depth
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Rated control supply current IS
typ. 80 mA
Input name
Start circuit
Max. permissible overall conductor resistance
150 Ω
Output description
non-safety-related
Switching voltage
min. 12 V AC/DC
Output fuse
6 A gL/gG (N/O contact)
Switching frequency
0.5 Hz
Typical pickup time at US
< 250 ms (when controlled via A1)
Net weight
172.9 g
Degree of protection
IP20
Mounting type
DIN rail mounting
pluggable
Yes
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Category
4
Rated insulation voltage
250 V AC
Shock
15g
ECLASS 10.0.1
27371819
ECLASS 4.1
40020600
ECLASS 9.0
27371819
UNSPSC 20.0
39122205
Height
112.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Power consumption at US
typ. 1.92 W
Input current range "0" signal
0 mA ... 2 mA (for safe Off; at S12 and S22)
Number of inputs
1
Protective circuit/component
Suppressor diode
Contact material
AgSnO2
Sq. Total current
48 A2 (observe derating)
Short-circuit protection
no
Recovery time
< 500 ms
Mounting position
vertical or horizontal
Assembly instructions
See derating curve
Housing material
PBT
Connection method
Screw connection
Conductor cross-section AWG
24 ... 12
Stop category
0
Vibration (operation)
10 Hz ... 150 Hz, 2g
Conformance
CE-compliant
ECLASS 5.1
27371900
ECLASS 6.0
27371800
UNSPSC 13.2
39121501
UNSPSC 19.0
39122205
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between input circuit and enabling current path (13/14) and enabling current path (23/24) and enabling current path (33/34)Basic insulation 4 kV between all current paths and housing
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
40020600
ETIM 7.0
EC001449

Product condition