2320539 Phoenix Contact Buffer Modules

2320539 Product Details

• Width
  94 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Fixed backup threshold
  < 22 V DC
• Connection in series
  No
• Dynamic Boost (IDyn.Boost)
  20 A (5 s)
• Depth
  125 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Ambient temperature (storage/transport)
  -40 °C ... 60 °C
• Installation height
  ≤ 4000 m
• Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max)
  7 A (max.)
• Output voltage
  22 V DC (typical)
• Short-circuit-proof
  yes
• Assembly instructions
  alignable: horizontally 0 mm, vertically 50 mm
• Stripping length
  8 mm
• Transmission physics
  USB 2.0
• EMC requirements for noise immunity
  EN 61000-6-1
• Noise emission
  EN 55016
• Frequency range
  0.15 MHz ... 80 MHz
• REACh SVHC
  Lead 7439-92-1
ECLASS 5.1
27242700
Height
130 mm
Ambient temperature (start-up type tested)
-40 °C
Input voltage
24 V DC (SELV)
Installation distance right/left
0 mm / 0 mm
Max. permissible relative humidity (operation)
≤ 95 %
Input voltage range
22.5 V DC ... 30 V DC
Buffer time
3 min. (1 A)
Connection in parallel
no
Static Boost (IStat.Boost)
6.25 A
MTBF (IEC 61709, SN 29500)
1301923 h (40 °C)
Protection class
III (Special application (SELV input voltage, hazardous voltages are generated in the device).)
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross section AWG
24 ... 16
Locking
Screw
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Contact discharge
6 kV (Test Level 3)
Discharge in air
8 kV (Test Level 3)
Voltage
10 V
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 7.0
27040603
UNSPSC 18.0
26111710
UNSPSC 20.0
26111710
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (operation)
-25 °C ... 60 °C (> 40 °C Derating: 1 %/K)
Voltage type of supply voltage
DC
Current consumption Icharge (UN, IOUT = 0, Icharge = max)
0.8 A (charging process)
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0)
0.1 A (No-load)
Nominal load power dissipation
3 W
Efficiency
> 97 % (with charged energy storage device)
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Topology
Point-to-point
Electrostatic discharge
EN 61000-4-2
Conducted interference
EN 61000-4-6
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.0
27242700
ECLASS 9.0
27049201
UNSPSC 21.0
26111710
Charging time
approx. 18 min.
Recharging time
approx. 12 min.
Output current IN
5 A (depending on output current)
Idling-proof
yes
Mounting position
horizontal DIN rail NS 35, EN 60715
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Number of interfaces
1
EMC requirements for noise emission
EN 61000-6-3
Electromagnetic HF field
EN 61000-4-3
Test field strength
10 V/m
ECLASS 6.0
27040600
ETIM 6.0
EC002850
Net weight
1.3 kg
Connection method
MINI-USB Type B
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Interface
USB (Modbus/RTU)
Connection marking
5.1
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Comments
Criterion A
Criterion A
Normal operating behavior within the specified limits.
ETIM 7.0
EC002850
UNSPSC 13.2
39121004
UNSPSC 19.0
26111710

Product condition