2320160 Phoenix Contact Redundancy Modules

2320160 Product Details

• Depth
  125 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Installation distance top/bottom
  50 mm / 50 mm
• Degree of pollution
  2
• Maximum input current
  2x 30 A (-25°C ... 40°C)
• Efficiency
  > 97 %
• Conductor cross section solid min.
  0.5 mm²
• Conductor cross section flexible max.
  16 mm²
• Conductor cross section AWG max.
  6
• Width
  50 mm
• Installation distance right/left
  5 mm / 5 mm
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Input voltage range
  30 V DC ... 56 V DC
• Nominal output current (IN)
  40 A (Increasing power)
• MTBF (IEC 61709, SN 29500)
  40000000 h
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Connection method
  Screw connection
• Screw thread
  M4
• EMC requirements for noise emission
  EN 61000-6-3
• Standard - Safe isolation
  DIN VDE 0100-410
Surge voltage load (surge)
EN 61000-4-5
ECLASS 5.0
27371000
ECLASS 9.0
27371010
UNSPSC 6.01
30211502
UNSPSC 13.2
32151504
Height
130 mm
Ambient temperature (operation)
-40 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Installation height
2000 m
Mains buffering time
typ.
Net weight
0.75 kg
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section AWG min.
10
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
EN 50178
Electromagnetic HF field
EN 61000-4-3
ECLASS 10.0.1
27371010
ECLASS 5.1
27371000
ETIM 2.0
EC001039
UNSPSC 11
39121004
Degree of protection
IP20
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input current
2x 20 A (-25 °C ... 60 °C)
Derating
60 °C ... 70 °C (2.5%/K)
Connection in series
No
Protection class
III
Conductor cross section flexible min.
0.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
ECLASS 7.0
27371010
ETIM 6.0
EC000683
UNSPSC 12.01
39121004
UNSPSC 21.0
32151504
Nominal input voltage range
48 V DC
Nominal output voltage
48 V DC
Power loss nominal load max.
14 W (IOUT = 20 A)
Housing material
Steel sheet, zinc-plated
Conductor cross section solid max.
16 mm²
Stripping length
10 mm
Insulation voltage input, output / housing
1000 V
Electrostatic discharge
EN 61000-4-2
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
ECLASS 4.0
27250300
ETIM 3.0
EC001039
UNSPSC 7.0901
39121004
UNSPSC 20.0
32151504
UNSPSC 18.0
32151504
UL approvals
UL/C-UL listed UL 508
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
ECLASS 4.1
27250300
ECLASS 11.0
27371010
ECLASS 6.0
27371000
ETIM 4.0
EC002540
ETIM 7.0
EC000683
UNSPSC 19.0
32151504

Product condition