2320021 Phoenix Contact DC/DC Converters

2320021 Product Details

• Height
  99 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Input voltage range
  10 V DC ... 32 V DC (> 10.5 V DC start)
• Input fuse
  6.3 A (slow-blow, internal)
• Peak switching voltages nominal load
  < 10 mVPP (20 MHz)
• Width
  22.5 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> +60°C derating)
• Max. permissible relative humidity (operation)
  ≤ 95 % (At +25°C, non-condensing)
• Frequency range DC
  0 Hz
• Nominal output voltage
  48 V DC ±1 %
• Setting range of the output voltage (USet)
  30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
• Residual ripple
  < 20 mVPP (20 MHz)
• Depth
  107 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage range
  12 V DC ... 24 V DC
• Mains buffering time
  typ. 2 ms (12 V DC)
• Nominal output current (IN)
  0.7 A (-25 °C ... 60 °C)
• Connection in series
  yes
• Net weight
  0.2 kg
Power loss nominal load max.
< 4.5 W
Housing material
Polyamide (PA)
Conductor cross section solid min.
0.2 mm²
Screw thread
M3
Status display
"DC OK" LED green
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Rail applications
EN 50121-4
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Surge voltage load (surge)
EN 61000-4-5
ECLASS 4.1
27210900
ECLASS 9.0
27210901
UNSPSC 11
39121004
UNSPSC 13.2
39121041
Conductor cross section solid max.
2.5 mm²
Stripping length
7 mm
Output name
DC OK active
Tightening torque, min
0.5 Nm
EMC requirements for noise emission
EN 61000-6-3
UL approvals
UL/C-UL listed UL 508
Electrostatic discharge
EN 61000-4-2
Fast transients (burst)
EN 61000-4-4
ECLASS 5.0
27210900
ECLASS 5.1
27210900
ETIM 4.0
EC002542
UNSPSC 12.01
39121004
UNSPSC 21.0
39121041
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Installation distance top/bottom
50 mm / 50 mm (≤ 70 °C)
Climatic class
3K3 (in acc. with EN 60721)
Current consumption
3.2 A (12 V DC)
Inrush current
< 10 A (typical)
Derating
60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP)
< 60 V DC
Maximum power dissipation in no-load condition
< 1.5 W
Protection class
III
Connection method
Pluggable screw connection
Conductor cross section AWG min.
24
Output description
UOUT > 0.9 x UN: High signal
Note on status display
UOUT > 0.9 x UN: LED ON
EMC requirements for noise immunity
EN 61000-6-1
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27210901
ECLASS 6.0
27210900
UNSPSC 7.0901
39121004
UNSPSC 18.0
39121041
Connection in parallel
Yes, for assembling redundant systems and increasing efficiency
Feedback voltage resistance
60 V DC
Typical response time
< 0.5 s
Insulation voltage input/output
1.5 kV (type test)
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section flexible min.
0.2 mm²
Continuous load current
≤ 20 mA
Tightening torque max
0.6 Nm
Standard - Safe isolation
DIN VDE 0100-410
CSA
CSA-C22.2 No. 107.1-01
Conducted interference
EN 61000-4-6
ECLASS 10.0.1
27210901
ECLASS 4.0
27210900
ETIM 3.0
EC001039
ETIM 7.0
EC002046
UNSPSC 6.01
30211502
UNSPSC 20.0
39121041
Efficiency
> 87 % (at 24 V DC and nominal values)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
14
Output voltage
+ 24 V (Signal)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic HF field
EN 61000-4-3
Voltage dips
EN 61000-4-11
ECLASS 7.0
27210901
ETIM 6.0
EC002046
UNSPSC 19.0
39121041

Product condition