1534546 Phoenix Contact Electrical Connectors

1534546 Product Details

• Length of cable
  0.5 m
• Number of positions
  5
• Degree of pollution
  3
• Flammability rating according to UL 94
  V0
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Rated surge voltage
  1.5 kV
• Overvoltage category
  II
• Insertion/withdrawal cycles
  > 100
• Contact surface material
  Ni/Au
• Cable structure
  3 x 2 x 0.22 mm²
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Rated voltage
  48 V AC
• Standards/regulations
  M12 connector IEC 61076-2-101
• Contact material
  CuZn
• Material, knurls
  Nickel-plated brass
• Standards/specifications
  M12 connector IEC 61076-2-101
• AWG signal line
  24
• Minimum bending radius, fixed installation
  7.5 x D
• ECLASS 4.0
  27140800
• ETIM 3.0
  EC002061
UNSPSC 12.01
31251501
UNSPSC 21.0
39121413
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Coding
B - inverse
Status display
No
Sealing material
FKM
ECLASS 6.0
27279200
UNSPSC 7.0901
31251501
UNSPSC 18.0
39121413
UNSPSC 19.0
39121413
Degree of protection
IP67 (When plugged in)
Insulation resistance
≥ 5 GΩ*km
Signal type/category
INTERBUS
ETIM 2.0
EC001297
UNSPSC 6.01
31251501
ETIM 6.0
EC002061
Contact carrier material
PA 6.6
Conductor cross section
3x 2x 0.22 mm²
Shielded
yes
ECLASS 5.1
27143400
ETIM 4.0
EC000830
UNSPSC 11
31251501
Conductor structure signal line
32x 0.10 mm
External sheath, color
may green RAL 6017
Bending radius
120 mm
Cable weight
70 kg/km
Outer sheath, material
PUR
ECLASS 9.0
27440102
ECLASS 7.0
27440103
UNSPSC 13.2
39121413
UNSPSC 20.0
39121413
Test voltage
2500 V
Cable type (abbreviation)
900
Shielding
Braided copper wires
Number of bending cycles
5000000
Traversing path
10 m
Material conductor insulation
PE
Attenuation
≤ 15 dB/km (at 256 kHz)
Nominal voltage, cable
250 V (Peak value, not for high-power applications)
ECLASS 11.0
27440102
Cable type
INTERBUS
Overall twist
3 pairs to the core
Signal speed
0.66 c
ECLASS 4.1
27140800
Torque
2 Nm ... 3 Nm (Installation-side)
External cable diameter D
8 mm
Acceleration
3.2 m/s²
Loop resistance
≤ 159.80 Ω/km
Test voltage Core/Shield
1000 Vrms
REACh SVHC
Lead 7439-92-1
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Twisted pairs
2 cores to the pair
Wave impedance
120 Ω ±20 % (at 64 kHz)
Conductor material
Bare Cu litz wires
Near end crosstalk attenuation (NEXT)
≥ 61 dB (at 772 kHz)
Flame resistance
according to VDE 0472, Part 4, test type B
China RoHS
Environmentally Friendly Use Period = 50 years
Wire colors
Green-yellow, white-brown, gray-pink
Minimum bending radius, flexible installation
15 x D
Traversing rate
1.6 m/s
Cable capacity
≤ 60 nF/km (At 800 Hz)
Coupling resistance
< 250.00 mΩ/m (at 30 MHz)
Test voltage Core/Core
1500 Vrms
ECLASS 10.0.1
27440102
ECLASS 5.0
27143400

Product condition