Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

1164788 Phoenix Contact Terminal Blocks

Phoenix Contact 1164788 Test disconnect terminal block, connection method: Push-in connection, cross section: 0.5 mm² - 6 mm² , AWG: 20 - 10, width: 8.2 mm, color: gray
Phoenix Contact

Part#:1164788

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 50

Nov 25, 2024

Test disconnect terminal block, connection method: Push-in connection, cross section: 0.5 mm² - 6 mm² , AWG: 20 - 10, width: 8.2 mm, color: gray

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 1164788 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Potentials
    1
  • Flammability rating according to UL 94
    V0
  • Maximum power dissipation for nominal condition
    1.31 W
  • Shock protection test specification
    DIN EN 50274 (VDE 0660-514):2002-11
  • Power frequency withstand voltage setpoint
    2.2 kV
  • Result of flexion and pull-out test
    Test passed
  • Result of temperature-rise test
    Test passed
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • ASD level
    6.12 (m/s2)2/Hz
  • Shock form
    Half-sine
  • Static insulating material application in cold
    -60 °C
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    28 MJ/kg
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Height NS 35/15
    62.4 mm
  • Connection in acc. with standard
    IEC 60947-7-1
  • Conductor cross section AWG min.
    20
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    1 mm²
  • Connection cross sections directly pluggable
    0.75 mm² 6 mm²
  • Ambient temperature (actuation)
    -5 °C ... 70 °C
  • ECLASS 4.0
    27141100
  • ECLASS 5.0
    27141100
  • Number of connections
    2
  • Insulating material
    PA
  • Nominal current IN
    30 A (with 6 mm² conductor cross section)
  • Finger protection
    guaranteed
  • Result of power-frequency withstand voltage test
    Test passed
  • Tractive force setpoint
    80 N
  • Conductor cross section short circuit testing
    4 mm²
  • Test spectrum
    Service life test category 2, bogie-mounted
  • Test directions
    X-, Y- and Z-axis (pos. and neg.)
  • Acceleration
    30g
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Length
    82 mm
  • Connection method
    Push-in connection
  • Number of levels
    1
  • Insulating material group
    I
  • Maximum load current
    30 A (with 6 mm² conductor cross section)
  • Surge voltage test setpoint
    9.8 kV
  • Bending test rotation speed
    10 rpm
  • Tensile test result
    Test passed
  • Conductor cross section tensile test
    6 mm²
  • Requirement temperature-rise test
    Increase in temperature ≤ 45 K
  • Result of aging test
    Test passed
  • UNSPSC 21.0
    39121410
  • Nominal cross section
    6 mm²
  • Rated surge voltage
    8 kV
  • Overvoltage category
    III
  • Result of surge voltage test
    Test passed
  • Back of the hand protection
    guaranteed
  • Bending test conductor cross section/weight
    0.5 mm² / 0.3 kg
  • Result of voltage-drop test
    Test passed
  • Short circuit stability result
    Test passed
  • Oscillation, broadband noise test result
    Test passed
  • Result of thermal test
    Test passed
  • Test specification, oscillation, broadband noise
    DIN EN 50155 (VDE 0115-200):2018-05
  • Color
    gray
  • Degree of pollution
    3
  • Nominal voltage UN
    1000 V
  • Open side panel
    Yes
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    130 °C
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 3
  • Height NS 35/7,5
    54.9 mm
  • Stripping length
    10 mm ... 12 mm
  • ETIM 7.0
    EC000902
  • UNSPSC 18.0
    39121410
  • Conductor cross section AWG max.
    10
  • Min. AWG conductor cross section, flexible
    20
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    6 mm²
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
    1.5 mm²
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • ECLASS 10.0.1
    27141126
  • ECLASS 4.1
    27141100
  • ECLASS 6.0
    27141100
  • UNSPSC 11
    39121410
  • UNSPSC 13.2
    39121410
  • Bending test turns
    135
  • Test duration per axis
    5 h
  • Shock duration
    18 ms
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Width
    8.2 mm
  • Conductor cross section solid min.
    0.75 mm²
  • Conductor cross section flexible max.
    6 mm²
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
    0.5 mm²
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • ETIM 3.0
    EC000902
  • ETIM 4.0
    EC000902
  • ETIM 2.0
    EC000902
  • UNSPSC 20.0
    39121410
  • Short-time current
    1.25 kA
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • Conductor cross section solid max.
    6 mm²
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    6 mm²
  • Internal cylindrical gage
    A4
  • ECLASS 11.0
    27141126
  • ECLASS 7.0
    27141126
  • ETIM 6.0
    EC000902
  • UNSPSC 6.01
    30211811
  • UNSPSC 12.01
    39121410
  • Requirements, voltage drop
    U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
  • Test frequency
    f1 = 5 Hz to f2 = 250 Hz
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Number of shocks per direction
    3
  • End cover width
    2.2 mm
  • Connection
    1 level
  • Conductor cross section flexible min.
    0.5 mm²
  • Max. AWG conductor cross section, flexible
    10
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    1.5 mm²
  • Ambient temperature (storage/transport)
    -25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • Operating temperature
    -60 °C ... 85 °C
  • ECLASS 9.0
    27141126
  • ECLASS 5.1
    27141100
  • UNSPSC 7.0901
    39121410
  • UNSPSC 19.0
    39121410

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


This item can ship within 24h!

1-year warranty

$11.31

Stock:

50

Select Qty:

$11.31

$11.31 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo