1164309 Phoenix Contact Electrical Wires & Cables

1164309 Product Details

• Affixed logo
  “PHOENIX CONTACT” logo
• Note on the connection method
  Connection via spade connector, separable
• Width
  75 mm
• Maximum charging power
  22 kW
• Number of signal contacts
  2 (CP, PP)
• Possible mounting positions
  Rear panel mounting
• Screw connection of a protective cover
  Only rear mounting possible
• Material
  Plastic
• Typical motor current for locking
  250 mA Average run current
• Recommended triggering time
  200 ms ... 10 s (ton, typical)
• Lock recognition
  available
• ECLASS 10.0.1
  27144706
• Type
  rear protective cover screw connection
• Standards/regulations
  IEC 62196-2
• Depth
  87.95 mm (with attachable cap for strain relief and touch protection, see accessories)
• Bore dimensions
  60 mm x 60 mm
• Number of phases
  3
• Rated voltage for power contacts
  480 V AC
• Rated voltage for signal contacts
  30 V AC
• Insertion force
  < 100 N
Mounting position of the locking actuator
Top center
Required mounting screws
M5 thread
Locking type
Locking in the inserted state with a locking mechanism
Max. dwell time with reverse current
4 s
Service life insertion cycles
> 10000 load cycles
Lock setting
LOCK (Lever in horizontal position)
Design
Generation 2 Basic
Height
112.54 mm
Type of conductor
without cable
Max. altitude
5000 m (above sea level)
Number of power contacts
5 (L1, L2, L3, N, PE)
Type of signal transmission
Pulse width modulation
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Screws included in the scope of delivery
none
Design line
Generation 2 Basic
Number of positions of theconnectors
3
Reverse current of the motor
max. 2.4 A (Stall current)
Cable structure
3 x 0.5 mm²
ECLASS 9.0
27144706
Charging standard
Type 2
Ambient temperature (operation)
-30 °C ... 50 °C
Degree of protection
IP44 (plugged in)
Rated current for signal contacts
2 A
Insertion/withdrawal cycles
> 10000
Mounting hole diameter
7.00 mm (ø)
Material surface of contacts
Ag
Possible power supply range at the motor
9 V ... 15.5 V
Pause time after entry or exit path
8x (ton, typical)
China RoHS
Environmentally Friendly Use Period = 10;
Application
For charging electric vehicles (EV) with alternating current (AC)
Charging mode
Mode 3, Case B
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Type of charging current
AC 3-phase
Rated current of power contacts
32 A
Withdrawal force
< 100 N
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Housing color
black
Operating voltage
12 V (Typical power supply at the motor)
Operating current
< 1.8 A
Cable length
0.5 m
Mechanical emergency release
available
ECLASS 11.0
27144706

Product condition