1164300 Phoenix Contact Electrical Wires & Cables

1164300 Product Details

• Max. wall thickness
  max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
• Material
  Plastic
• Locking type
  Locking in the inserted state with a locking mechanism
• Service life insertion cycles
  > 10000 load cycles
• Cable structure
  4 x 0.5 mm²
• ECLASS 9.0
  27144706
• Standards/regulations
  IEC 62196-2
• Depth
  87.95 mm (with attachable cap for strain relief and touch protection, see accessories)
• Type of conductor
  without cable
• Type of charging current
  AC 3-phase
• Number of signal contacts
  2 (CP, PP)
• Type of signal transmission
  Pulse width modulation
• Mounting position of the locking actuator
  Top center
• Screws included in the scope of delivery
  none
• Possible power supply range at the motor
  9 V ... 16 V
• Typical motor current for locking
  0.2 A
• Pause time after entry or exit path
  3 s
• China RoHS
  Environmentally Friendly Use Period = 10;
• Design
  Generation 2 Basic
• Charging mode
  Mode 3, Case B
Width
75 mm
Max. altitude
5000 m (above sea level)
Degree of protection
IP44 (plugged in)
Number of phases
3
Rated current for signal contacts
2 A
Withdrawal force
< 100 N
Insertion force
< 100 N
Screw connection of a protective cover
Only rear mounting possible
Housing color
black
Maximum voltage for locking detection
30 V
Cable length
0.5 m
Mechanical emergency release
available
Application
For charging electric vehicles (EV) with alternating current (AC)
Charging standard
Type 2
Height
91.71 mm
Bore dimensions
60 mm x 60 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Rated voltage for power contacts
480 V AC
Rated voltage for signal contacts
30 V AC
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Mounting hole diameter
7.00 mm (ø)
Operating voltage
12 V (Typical power supply at the motor)
Reverse current of the motor
max. 1 A
Max. dwell time with reverse current
1000 ms
Lock recognition
available
Affixed logo
“PHOENIX CONTACT” logo
Type
rear protective cover screw connection
Note on the connection method
Connection via spade connector, separable
Ambient temperature (operation)
-30 °C ... 50 °C
Maximum charging power
22 kW
Number of power contacts
5 (L1, L2, L3, N, PE)
Rated current of power contacts
32 A
Insertion/withdrawal cycles
> 10000
Possible mounting positions
Rear panel mounting
Design line
Generation 2 Basic
Material surface of contacts
Ag
Number of positions of theconnectors
4
Recommended adaptation time
600 ms
ECLASS 11.0
27144706
ECLASS 10.0.1
27144706

Product condition