1093660 Phoenix Contact Terminal Blocks
Part#:1093660
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Installation terminal block, with six-lobe screw, Screw connection, cross section: 2.5 mm² - 25 mm², AWG: 12 - 4, width: 12.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1093660 Phoenix Contact price in the box on the right side or send a quick quote.
1093660 Product Details
- Color gray
- Maximum load current 101 A (with 25 mm² conductor cross section)
- Insulating material group I
- Nominal current IN 76 A
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Bending test turns 135
- Conductor cross section short circuit testing 16 mm²
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test duration per axis 5 h
- Nominal cross section 16 mm²
- Degree of pollution 3
- Nominal voltage UN 400 V
- Result of surge voltage test Test passed
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Acceleration 30g
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Width 12.2 mm
- Conductor cross section solid min. 2.5 mm²
- Conductor cross section flexible max. 16 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 16 mm²
- 2 conductors with same cross section, stranded min. 1.5 mm²
- Connection method Screw connection
- ECLASS 4.1 27141120
- ECLASS 6.0 27141100
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 20.0 39121410
- Insulating material PA
- Connection in acc. with standard IEC 60947-7-1
- Open side panel Yes
- Power frequency withstand voltage setpoint 1.89 kV
- Bending test rotation speed 10 rpm
- Bending test conductor cross section/weight 2.5 mm² / 0.7 kg
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test spectrum Service life test category 2, bogie-mounted
- Shock duration 18 ms
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Height NS 32 52 mm
- Conductor cross section AWG max. 4
- 2 conductors with same cross section, stranded max. 6 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.75 mm²
- Stripping length 11 mm
- ECLASS 10.0.1 27141125
- ECLASS 7.0 27141125
- ETIM 6.0 EC001329
- UNSPSC 19.0 39121410
- Number of connections 2
- Flammability rating according to UL 94 V2
- Overvoltage category III
- Back of the hand protection guaranteed
- Result of flexion and pull-out test Test passed
- Setpoint 5 N
- Short circuit stability result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Shock form Semi-sinusoidal
- Relative insulation material temperature index (Elec., UL 746 B) 125 °C
- Height NS 35/15 54.5 mm
- Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 16 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 1.5 mm²
- Tightening torque, min 1.4 Nm
- ECLASS 4.0 27141120
- ECLASS 9.0 27141125
- UNSPSC 7.0901 39121410
- UNSPSC 13.2 39121410
- Number of levels 1
- Rated surge voltage 6 kV
- Maximum power dissipation for nominal condition 2.43 W
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of power-frequency withstand voltage test Test passed
- Tight fit on carrier NS 32/NS 35
- Short-time current 1.92 kA
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Number of shocks per direction 3
- End cover width 1.8 mm
- Height NS 35/7,5 47 mm
- Conductor cross section flexible min. 4 mm²
- 2 conductors with same cross section, solid min. 1.5 mm²
- 2 conductors with same cross section, solid max. 6 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 4 mm²
- Tightening torque max 1.5 Nm
- ECLASS 5.0 27141120
- ECLASS 5.1 27141100
- ETIM 3.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- Length 42.5 mm
- Conductor cross section solid max. 25 mm²
- Conductor cross section AWG min. 12
- Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 10 mm²
- Screw thread M4
- ECLASS 11.0 27141125
- ETIM 2.0 EC000897
- ETIM 7.0 EC001329
- UNSPSC 6.01 30211811
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1093660
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨