1093658 Phoenix Contact Terminal Blocks
Part#:1093658
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Installation terminal block, with six-lobe screw, Screw connection, cross section: 0.75 mm² - 35 mm², AWG: 18 - 2, width: 15.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1093658 Phoenix Contact price in the box on the right side or send a quick quote.
1093658 Product Details
- Color gray
- Degree of pollution 3
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Power frequency withstand voltage setpoint 2 kV
- Result of tight fit on support Test passed
- Conductor cross section short circuit testing 35 mm²
- Result of thermal test Test passed
- Test duration per axis 5 h
- Number of shocks per direction 3
- Width 15.2 mm
- Conductor cross section solid min. 0.75 mm²
- Conductor cross section flexible max. 35 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm²
- 2 conductors with same cross section, stranded min. 0.75 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 6 mm²
- Screw thread M6
- ECLASS 4.0 27141120
- ECLASS 6.0 27141100
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 13.2 39121410
- Number of levels 1
- Insulating material PA
- Insulating material group I
- Connection in acc. with standard IEC 60947-7-1
- Result of power-frequency withstand voltage test Test passed
- Bending test conductor cross section/weight 0.75 mm² / 0.4 kg
- Result of temperature-rise test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 30g
- Length 55 mm
- Conductor cross section solid max. 35 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.75 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.75 mm²
- Tightening torque, min 3.2 Nm
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.1 27141120
- ECLASS 7.0 27141125
- ETIM 6.0 EC001329
- UNSPSC 18.0 39121410
- Flammability rating according to UL 94 V2
- Overvoltage category III
- Nominal current IN 125 A
- Open side panel No
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Setpoint 10 N
- Short-time current 4.2 kA
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock form Semi-sinusoidal
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Height NS 35/15 58.5 mm
- Conductor cross section AWG min. 18
- Conductor cross section flexible, with ferrule with plastic sleeve max. 35 mm²
- 2 conductors with same cross section, solid max. 10 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.75 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 11.0 27141125
- ECLASS 5.0 27141120
- ETIM 2.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 20.0 39121410
- Number of connections 2
- Rated surge voltage 8 kV
- Nominal voltage UN 800 V
- Result of surge voltage test Test passed
- Bending test rotation speed 10 rpm
- Tight fit on carrier NS 32/NS 35
- Proof of thermal characteristics (needle flame) effective duration 30 s
- ASD level 6.12 (m/s2)2/Hz
- Shock duration 18 ms
- Height NS 32 56 mm
- Conductor cross section AWG max. 2
- 2 conductors with same cross section, solid min. 0.75 mm²
- Connection method Screw connection
- Tightening torque max 3.7 Nm
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 9.0 27141125
- ETIM 7.0 EC001329
- UNSPSC 12.01 39121410
- UNSPSC 21.0 39121410
- Nominal cross section 35 mm²
- Maximum load current 125 A (with 35 mm² conductor cross section)
- Maximum power dissipation for nominal condition 4.06 W
- Back of the hand protection guaranteed
- Result of flexion and pull-out test Test passed
- Bending test turns 135
- Short circuit stability result Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Relative insulation material temperature index (Elec., UL 746 B) 125 °C
- Height NS 35/7,5 51 mm
- Conductor cross section flexible min. 0.75 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.75 mm²
- 2 conductors with same cross section, stranded max. 10 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 10 mm²
- Stripping length 16 mm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 125°C)
- ECLASS 10.0.1 27141125
- ECLASS 5.1 27141100
- ETIM 3.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1093658
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨