1091577 Phoenix Contact Terminal Blocks

1091577 Product Details

• Color
  gray
• Rated surge voltage
  8 kV
• Nominal voltage UN
  800 V
• Back of the hand protection
  guaranteed
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  6.15 mm
• Height NS 35/15
  44.3 mm
• Conductor cross section solid max.
  6 mm²
• Conductor cross section AWG min.
  24
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.5 mm²
• Connection cross sections directly pluggable
  0.5 mm² 6 mm²
• ECLASS 9.0
  27141120
Maximum load current
32 A
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
0.964 (m/s2)2/Hz
Test duration per axis
5 h
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
90.8 mm
Height NS 35/7,5
36.7 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Operating temperature
-60 °C (maximum operating temperature see derating curve)
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Insulating material
PA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Short-time current
0.48 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
36.8 mm
Conductor cross section AWG max.
12
Conductor cross section flexible max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in / plug connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120

Product condition