1091673 Phoenix Contact Terminal Blocks
Part#:1091673
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 6
Nov 26, 2024
Distribution block, Basic terminal block with supply, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 24 A, connection method: Push-in connection
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1091673 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of levels 1
- Color blue/white
- Rated surge voltage 6 kV
- Nominal voltage UN 450 V
- Result of thermal test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Shock test result Test passed
- Number of shocks per direction 3
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Width 56.5 mm
- Conductor cross section solid min. 1 mm²
- Min. AWG conductor cross section, flexible 20
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.1 27141120
- ETIM 4.0 EC000897
- UNSPSC 12.01 39121410
- Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
- Nominal cross section feed-in 6 mm²
- Degree of pollution 3
- Maximum total current 57 A (with 10 mm² conductor cross section)
- Open side panel No
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Connection in acc. with standard IEC 60998-2-2
- Conductor cross section flexible min. 0.5 mm²
- Connection Feed-in stage
- ECLASS 5.0 27141120
- ETIM 3.0 EC000897
- UNSPSC 11 39121410
- Nominal cross section 2.5 mm²
- Flammability rating according to UL 94 V0
- Maximum load current 57 A (with 10 mm² conductor cross section)
- Finger protection guaranteed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Shock duration 18 ms
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Height 21.7 mm
- Stripping length 10 mm ... 12 mm
- Conductor cross section AWG max. 8
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- Connection cross sections directly pluggable 1 mm² 10 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- Value 1 mm²
- ECLASS 11.0 27141120
- Potentials 1
- Insulating material group I
- Nominal current IN 41 A (with 6 mm² conductor cross section)
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Acceleration 30g
- Shock form Half-sine
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Connection method Push-in connection
- Conductor cross section AWG min. 20
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Number of connections 19
- Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Oscillation, broadband noise test result Test passed
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- ECLASS 4.1 27141121
- ECLASS 6.0 27141100
- UNSPSC 7.0901 39121410
- Conductor cross section solid max. 10 mm²
- Internal cylindrical gage A3
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141120
- ECLASS 4.0 27141121
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Conductor cross section flexible max. 10 mm²
- ETIM 6.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
- Insulating material PA
- Overvoltage category III
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- ECLASS 9.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- Back of the hand protection guaranteed
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Surface flammability NFPA 130 (ASTM E 162) passed
- Length 28.6 mm
- Max. AWG conductor cross section, flexible 10
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 7.0 27141120
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$8.64
Stock:
6
Select Qty:
$8.64
$8.64 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨