1091672 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  13
• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  450 V
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Width
  41 mm
• Stripping length
  10 mm ... 12 mm
• Max. AWG conductor cross section, flexible
  10
• Min. AWG conductor cross section, flexible
  20
• Nominal cross section feed-in
  6 mm²
• Overvoltage category
  III
• Open side panel
  No
• Number of levels
  1
• Degree of pollution
  3
• Insulating material group
  I
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Color
  blue/white
• Rated surge voltage
  6 kV
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Value
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
8
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
21.7 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
28.6 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Maximum load current
57 A (with 10 mm² conductor cross section)
Result of thermal test
Test passed
Acceleration
30g
Shock duration
18 ms
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Maximum total current
57 A (with 10 mm² conductor cross section)
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Connection
Feed-in stage
Back of the hand protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Finger protection
guaranteed
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C