1087561 Phoenix Contact Electrical Safety Devices

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Filter time
  max. 1.5 ms (Test pulse width of low test pulses)
• Nominal voltage for I/O supply
  24 V DC -20 % / +25 % (is provided via the IO-Link interface of the IO-Link master.)
• Number of inputs
  1
• Max. permissible overall conductor resistance
  150 Ω
• Cycle Time
  5 ms
• Height
  112.2 mm
• Rated control circuit supply voltage US
  24 V DC -20 % / +25 % (provide external protection)
• Description of the input
  IO-Link switching and communication cable
• Input voltage range "0" signal
  0 V DC ... 5 V DC
• Input current range "0" signal
  0 mA ... 2 mA
• Connection method
  Screw connection
• Process data update
  5 ms
• Output name
  14, 24
• Output voltage
  ≥ 23 V DC (Us - 1 V)
• Max. capacitive load
  max. 10 µF (2.4 A load)
• Discharging circuit
  No
• Typical response time at US
  < 200 ms (automatic start)
• Net weight
  130.42 g
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Stripping length
7 mm
Torque
0.5 Nm ... 0.6 Nm
Rated surge voltage/insulation
Safe isolation, 0.5 kw between logic and IO-Link
Shock
30g
Width
17.5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Designation
Air clearances and creepage distances between the power circuits
Rated control supply current IS
typ. 72 mA
Power consumption at US
typ. 1.73 W
Type of protection
Freewheeling circuit for inductive loads
Specification
Version 1.1
Number of ports
1
Output voltage when switched off
< 5 V DC (in the safe state)
Max. inductive load
max. 1 H
Typical pickup time at US
< 200 ms (when controlled via A1)
Recovery time
250 ms (following demand of the safety function)
Degree of protection
IP20
Status display
5x LED green
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Screw thread
M3
Category
4
Rated insulation voltage
63 V
Degree of pollution
2
ECLASS 10.0.1
27371819
Ambient temperature (operation)
-40 °C ... 60 °C (observe derating)
Inrush current
max. 4.8 A (Δt = 10 ms)
Current consumption
< 7 mA (Typically with US at S34)
Input name
C/Q
Input voltage range
0 V DC ... 30 V DC
Transmission speed
230 kbps (COM3)
Amount of process data
max. 31 Byte (Input data)
Number of outputs
1
Ohmic load
min. 12 Ω
Min. load current
2 mA
Limitation of the voltage induced on circuit interruption
max. 50 V
Response time
< 10 ms
Nominal operating mode
100% operating factor
Housing material
PBT
pluggable
Yes
Conductor cross-section AWG
24 ... 12
Performance level (PL)
e
Safety Integrity Level Claim Limit (SIL CL)
3
ECLASS 9.0
27371819
Depth
114.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Maximum altitude
≤ 2000 m (Above sea level)
Protective circuit
Parallel protection against polarity reversal Suppressor diode Provide external fuse protection, see safety notes. Fuse type: 5 AT
Protective circuit/component
Suppressor diode
Input voltage range "1" signal
19.2 V DC ... 30 V DC
Concurrence
∞
Connection technology
3-conductor
Output current
max. 2.4 A
Leakage current
max. 1 mA (in the safe state)
Switching frequency
1 Hz (Resistive, inductive, capacitive)
Current
max. 100 mA
Standards/regulations
EN 60947-5-1
Overvoltage category
II
Conformance
CE-compliant
Port type
Class A
Output description
PNP
Short-circuit protection
Yes
Voltage
approx. 22 V DC (Us - 2 V)
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Restart time
< 1 s (Boot time)
Assembly instructions
See derating curve
Mounting type
DIN rail mounting
Housing color
yellow
Operating voltage display
1 x green, yellow, red LED
Stop category
0
Safety Integrity Level (SIL)
3
Vibration (operation)
10 Hz ... 150 Hz, 5g
ECLASS 11.0
27371819