1079231 Phoenix Contact Programmable Logic Controllers

1079231 Product Details

• Air pressure (operation)
  70 kPa ... 108 kPa
• Conductor cross section flexible min.
  0.25 mm²
• Conductor cross section, flexible, with ferrule, with plastic sleeve
  0.25 mm² ... 1.5 mm²
• Protective circuit
  Surge protection of the supply voltage electronic (35 V, 0.5 s)
• Switching frequency
  1 Hz (0.2 Hz at > 1 A)
• Output voltage when switched off
  < 5 V
• Reverse voltage resistance to short pulses
  no
• Width
  14.9 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Nominal load, inductive
  48 VA (1 H; 12 Ω; at nominal voltage)
• Depth
  62 mm
• Air pressure (storage/transport)
  66 kPa ... 108 kPa
• Degree of protection
  IP20
• Conductor cross section AWG max.
  16
• Output name
  Safe digital outputs
• Connection technology
  2-conductor
• Nominal output voltage
  24 V DC
• Color
  zinc yellow RAL 1018
• Degree of protection at installation location
  min. IP54
• Note on the connection method
  Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Caption
Dimensions
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm²
Stripping length
8 mm
Output current
max. 2 A (per output)
Ambient temperature (operation)
-25 °C ... 60 °C
Number
1
Output description
EN 61131-2
Height
62.2 mm
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Designation
EN 62061
Conductor cross section flexible max.
1.5 mm²
Conductor cross section solid max.
1.5 mm²
Output voltage
24 V DC
Limitation of the voltage induced on circuit interruption
-15 V
Behavior with overload
Switch-off of the relevant output, restart upon acknowledgment
Holding voltage
> 5 V (min. holding voltage of the connected load)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Connection method
Push-in connection
Conductor cross section solid min.
0.25 mm²
Transmission speed
See system in which you use the Smart Element.
Number of outputs
4 (1-channel assignment)
Nominal load, ohmic
48 W (12 Ω, at nominal voltage)
Derating
up to 40°C: 4 A total currentfrom 40°C: 100 mA/°C derating
Stop category in accordance with IEC 60204
0
Air clearances and creepage distances
IEC 60664-1
Overvoltage category
II (IEC 60664-1)
China RoHS
Environmentally Friendly Use Period = 50 years
Mounting type
Smart Element slot
Maximum altitude
≤ 3000 m (Above sea level)
Additional text
using card edge connectors
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, 2 kV
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Test pulses
Configurable switch-on impulses, fixed shut-off impulses
Operating mode
PROFIsafe 2.4, PROFIsafe 2.6.1
Current consumption
min. 21 mA ((Supply from UP with 19.2 V DC, all outputs set, without supply to the actuators))
Power consumption
min. 403 mW
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion A, 6 kV contact discharge, 8 kV air discharge
Safety Integrity Level Claim Limit (SIL CL)
2 (1-channel assignment)
Interference emission
Noise emission test as per EN 61000-6-4 Class A (industrial applications)
ECLASS 11.0
27242604
ECLASS 9.0
27242604
Load min.
1.5 kΩ (at nominal voltage)
Safety Integrity Level (SIL)
2 (1-channel assignment)
Mounting position
any
Supply voltage
24 V DC (using card edge connectors)
Protection
external fusing via the system in which the Smart Element is used
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
REACh SVHC
Lead 7439-92-1
Output current when switched off
< 2 mA
Net weight
36 g
Degree of pollution
2 (EN 60664-1)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Test intensity 2, Criterion APower supply: 0.5 kV/0.5 kV (symmetrical/unsymmetrical)Signal lines: 1.0 kV/2.0 kV (symmetrical/unsymmetrical)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Performance level (PL)
d (1-channel assignment)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Behavior with inductive overload
Output can be destroyed
Category
3 (1-channel assignment)
Holding current
> 2 mA (min. holding current of the connected load)
Max. capacitive load
10 µF (for ZVEI class 0)
ECLASS 10.0.1
27242604

Product condition