1032734 Phoenix Contact Terminal Blocks
Part#:1032734
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Component terminal block, with integrated 1N4007 diode, The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A., nom. voltage: 500 V, nominal current: 0.5 A, connection method: Pus
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1032734 Phoenix Contact price in the box on the right side or send a quick quote.
1032734 Product Details
- Nominal cross section 2.5 mm²
- Overvoltage category III
- Open side panel Yes
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Setpoint 1 N
- Result of aging test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Test directions X-, Y- and Z-axis (pos. and neg.)
- End cover width 2.2 mm
- Length 68 mm
- Conductor cross section flexible min. 0.14 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27141127
- ECLASS 7.0 27141127
- ETIM 4.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- Number of levels 2
- Rated surge voltage 6 kV
- Degree of pollution 3
- Maximum load current 0.5 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Surge voltage test setpoint 7.3 kV
- Bending test rotation speed 10 rpm
- Short circuit stability result Test passed
- Conductor cross section short circuit testing 4 mm²
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Number of shocks per direction 3
- Connection method Push-in connection
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- Color gray
- Insulating material group I
- Back of the hand protection guaranteed
- Bending test turns 135
- Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
- Short-time current 0.48 kA
- ASD level 6.12 (m/s2)2/Hz
- Acceleration 30g
- Shock duration 18 ms
- Height NS 35/7,5 47.5 mm
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- ECLASS 4.1 27141100
- ECLASS 9.0 27141127
- ETIM 7.0 EC000903
- UNSPSC 13.2 39121410
- Note The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
- Insulating material PA
- Nominal current IN 0.5 A
- Nominal voltage UN 500 V
- Power frequency withstand voltage setpoint 1.89 kV
- Result of flexion and pull-out test Test passed
- Result of tight fit on support Test passed
- Result of thermal test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Test duration per axis 5 h
- Shock test result Test passed
- Height 45.8 mm
- Height NS 35/15 55 mm
- Conductor cross section AWG max. 12
- Number of connections 4
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 0.77 W (the value is multiplied when connecting multiple levels)
- Result of surge voltage test Test passed
- Checking the mechanical stability of terminal points (5 x conductor connection) Test passed
- Tight fit on carrier NS 35
- Ageing test for screwless modular terminal block temperature cycles 192
- Oscillation, broadband noise test result Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock form Half-sine
- Width 5.2 mm
- Conductor cross section solid min. 0.14 mm²
- Conductor cross section AWG min. 26
- Internal cylindrical gage A3
- ECLASS 11.0 27141127
- ECLASS 4.0 27141100
- ECLASS 6.0 27141100
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm²
- Stripping length 8 mm ... 10 mm
- ECLASS 5.1 27141100
- ETIM 3.0 EC000897
- ETIM 6.0 EC000903
- UNSPSC 12.01 39121410
- UNSPSC 21.0 39121410
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- ECLASS 5.0 27141100
- ETIM 2.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 20.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1032734
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨