1032470 Phoenix Contact Relays

1032470 Product Details

• Note
  Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
• Typical input current at UN
  31 mA
• Contact type
  2 changeover contacts
• Maximum switching voltage
  250 V AC/DC
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Designation
  Corrosive gas test
• Insulation
  Basic insulation
• ECLASS 11.0
  27371601
• ECLASS 5.1
  27371600
• Type of note
  Notes on operation
• Nominal input voltage UN
  24 V DC
• Typical release time
  10 ms
• Type of switch contact
  Single contact
• Min. switching current
  10 mA (12 V)
• Service life, electrical
  see diagram
• Rated insulation voltage
  250 V AC
• Rated surge voltage
  5 kV
• ECLASS 10.0.1
  27371601
• ECLASS 7.0
  27371601
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
Power dissipation for nominal condition
741 mW
Minimum switching voltage
12 V (10 mA)
Switching capacity min.
120 mW
Mounting position
any
Standards/regulations
EN 61810-1
Pollution degree
2
ECLASS 6.0
27371600
Ambient temperature (operation)
-40 °C ... 70 °C
Typical response time
15 ms
Contact material
AgNi
Interrupting rating (ohmic load) max.
288 W (24 V DC)
Limiting continuous current
12 A
Operating mode
100% operating factor
Overvoltage category
III
ECLASS 5.0
27371600
ETIM 6.0
EC001437
Maximum altitude
≤ 2000 m
Degree of protection
RT II
Coil voltage
24 V DC
Maximum inrush current
24 A (20 ms, N/O contacts)
Mechanical service life
3x 107 cycles
Assembly instructions
In rows with zero spacing
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27371601
ETIM 7.0
EC001437

Product condition