0309112 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Insulating material group
  I
• Color
  gray
• Degree of pollution
  3
• Open side panel
  Yes
• Finger protection
  guaranteed
• Number of connections
  2
• Connection in acc. with standard
  IEC 60947-7-1
• Nominal voltage UN
  500 V
• Bending test rotation speed
  10 rpm
• Temperature-rise test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Number of shocks per direction
  3
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 32
  63.5 mm
• Number of levels
  1
• Rated surge voltage
  6 kV
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of flexion and pull-out test
  Test passed
Short circuit stability result
Test passed
Short-time current
1.2 kA
Shock form
Semi-sinusoidal
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Flammability rating according to UL 94
V0
Overvoltage category
III
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Bending test turns
135
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Width
10.2 mm
Power frequency withstand voltage setpoint
1.89 kV
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Length
61 mm
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
Disconnect element
M3 0.6 Nm 0.8 Nm
Tightening torque, min
1.5 Nm
Conductor cross section solid max.
16 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Nominal current IN
70 A
Surface flammability NFPA 130 (ASTM E 162)
passed
Height NS 35/15
66 mm
Note
Terminal point
Conductor cross section flexible min.
0.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Connection method
Screw connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Test directions
X-, Y- and Z-axis (pos. and neg.)
2 conductors with same cross section, stranded min.
0.2 mm²
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
10 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
58.5 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Stripping length
8 mm
Tightening torque max
1.8 Nm
ECLASS 10.0.1
27141126
ECLASS 4.0
27141100
2 conductors with same cross section, stranded max.
4 mm²
Screw thread
M4
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 2.0
EC000902
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 6.01
30211811
2 conductors with same cross section, solid max.
4 mm²
ECLASS 7.0
27141126
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
UNSPSC 7.0901
39121410
ECLASS 5.0
27141100
ETIM 7.0
EC000902
Conductor cross section flexible max.
10 mm²
ECLASS 11.0
27141126
ETIM 3.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
ETIM 4.0
EC000902
UNSPSC 21.0
39121410
ECLASS 5.1
27141100
ETIM 6.0
EC000902
UNSPSC 20.0
39121410
ECLASS 9.0
27141126
UNSPSC 11
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
UNSPSC 18.0
39121410