VDM28-8-L1-IO/115B/136 Pepperl + Fuchs Electronic Components
Part#:VDM28-8-L1-IO/115B/136
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Distance sensor, Universal distance sensor, measurement to object, IO-Link interce, measuring method PRT, 8 m detection range, red laser light, laser class 1, push-pull output, fixed cable with M12 plug, Distance measurement using object, Measuring method
Check out the VDM28-8-L1-IO/115B/136 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Housing Plastic ABS
- Optical face PMMA
- Degree of protection IP67
- Mass 90 g
- Connection 300 mm fixed cable with M12 x 1, 4-pin connector
- Housing depth 54.6 mm
- Housing height 88 mm
- Housing width 25.8 mm
- Storage temperature -30 ... 70 °C (-22 ... 158 °F)
- FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- Ambient temperature -30 ... 55 °C (-22 ... 131 °F)
- CCC approval CCC approval / marking not required for products rated ≤36 V
- UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure
- Protection class II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
- EAC conformity TR CU 020/2011
- Laser safety IEC 60825-1:2007
- Product standard EN 60947-5-2
- Absolute accuracy ± 25 mm
- Repeat accuracy < 5 mm
- Switching current max. 100 mA
- Response time 10 ms
- Switching frequency 50 Hz
- Switching voltage max. 30 V DC
- Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
- SIO mode support yes
- Cycle time min. 2.3 ms
- Process data width 16 bit
- Mode COM2 (38.4 kBit/s)
- No-load supply current ≤ 70 mA / 24 V DC
- Protocol IO-Link V1.0
- Ripple 10 % within the supply tolerance
- Time delay before availability 1.5 s
- Interface type IO-Link
- Operation indicator LED green
- Function indicator 2 LEDs yellow for switching state
- Operating voltage 10 ... 30 V DC / when operating in IO-Link mode: 18 ... 30 V
- Control elements 5-step rotary switch for operating modes selection (threshold setting and operating modes)
- Teach-In indicator Teach-In: LED green/yellow equiphase flashing; 2.5 Hz, Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
- Diagnostic Coverage (DC) 0 %
- Temperature influence typ. ≤ 0.25 mm/K
- MTTFd 200 a
- Diameter of the light spot < 10 mm at a distance of 8 m at 20 °C
- Mission Time (TM) 10 a
- Ambient light limit 50000 Lux
- Measuring method Pulse Ranging Technology (PRT)
- Angle deviation max. ± 2°
- max. pulse energy < 1.5 nJ
- Repetition rate 250 kHz
- Pulse length approx. 4 ns
- Beam divergence < 1.5 mrad
- Light type modulated visible red light
- Note LASER LIGHT , DO NOT STARE INTO BEAM
- Wave length 660 nm
- Reference target Kodak white (90%)
- Measurement range 0.2 ... 8 m
- Laser class 1
- Light source laser diode, typ. service life 85,000 h at Ta = +25 °C
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents VDM28-8-L1-IO/115B/136 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨