VDM28-50-R1-IR-IO/73C/110/122 Pepperl + Fuchs Electronic Components
Part#:VDM28-50-R1-IR-IO/73C/110/122
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Distance sensor, Universal distance sensor, measurement to reflector, IO-Link interce, measuring method PRT, 50 m detection range, infrared laser light, laser class 1, push-pull output, analog output, M12 plug, Retroreflective laser distance sensor, Measu
Check out the VDM28-50-R1-IR-IO/73C/110/122 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Optical face PMMA
- Mass 90 g
- Housing Plastic ABS
- Connection 4-pin, M12 x 1 connector
- Degree of protection IP67
- Ambient temperature -30 ... 55 °C (-22 ... 131 °F)
- Housing width 25.8 mm
- Housing depth 54.6 mm
- Storage temperature -30 ... 70 °C (-22 ... 158 °F)
- FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- CCC approval CCC approval / marking not required for products rated ≤36 V
- UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure
- EAC conformity TR CU 020/2011
- Housing height 88 mm
- Protection class II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
- Repeat accuracy < 5 mm
- Absolute accuracy ± 25 mm
- Switching frequency 50 Hz
- Laser safety IEC 60825-1:2007
- Response time 10 ms
- Switching current max. 100 mA
- Measurement output 1 analog output 4 ... 20 mA, short-circuit/overload protected
- Product standard EN 60947-5-2
- Process data width 16 bit
- Switching voltage max. 30 V DC
- Signal output Push-pull output, short-circuit protected, reverse polarity protected
- SIO mode support yes
- Mode COM2 (38.4 kBit/s)
- Cycle time min. 2.3 ms
- No-load supply current ≤ 70 mA / 24 V DC
- Protocol IO-Link V1.0
- Time delay before availability 1.5 s
- Interface type IO-Link
- Control elements 5-step rotary switch for operating modes selection (threshold setting and operating modes)
- Ripple 10 % within the supply tolerance
- Operating voltage 10 ... 30 V DC / when operating in IO-Link mode: 18 ... 30 V
- Operation indicator LED green
- Diagnostic Coverage (DC) 0 %
- Teach-In indicator Teach-In: LED green/yellow equiphase flashing; 2.5 Hz, Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
- Function indicator 2 LEDs yellow for switching state
- MTTFd 200 a
- Diameter of the light spot < 50 mm at a distance of 50 m at 20 °C
- Temperature influence typ. ≤ 0.25 mm/K
- Mission Time (TM) 10 a
- Ambient light limit 50000 Lux
- Angle deviation max. ± 2°
- Measuring method Pulse Ranging Technology (PRT)
- max. pulse energy < 2.2 nJ
- Wave length 780 nm
- Repetition rate 250 kHz
- Reference target OFR-100/100
- Beam divergence < 1.5 mrad
- Measurement range 0.2 ... 50 m
- Pulse length approx. 4 ns
- Note INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM
- Light source laser diode, typ. service life 85,000 h at Ta = +25 °C
- Laser class 1
- Light type modulated infrared light
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents VDM28-50-R1-IR-IO/73C/110/122 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨