VDM28-15-L1/73C/136 Pepperl + Fuchs Electronic Components
Part#:VDM28-15-L1/73C/136
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Distance sensor, Universal distance sensor, measurement to object, PRT measuring method, 15 m detection range, red laser light, laser class 1, push-pull output, M12 plug, Distance measurement using object, Measuring method PRT (Pulse Ranging Technology),
Check out the VDM28-15-L1/73C/136 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Degree of protection IP67
- Connection 4-pin, M12 x 1 connector
- Mass 90 g
- Optical face PMMA
- Housing Plastic ABS
- Housing width 25.8 mm
- Housing depth 54.3 mm
- Housing height 88 mm
- Storage temperature -30 ... 70 °C (-22 ... 158 °F)
- FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- Protection class II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
- Ambient temperature -30 ... 55 °C (-22 ... 131 °F)
- CCC approval CCC approval / marking not required for products rated ≤36 V
- UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure
- EAC conformity TR CU 020/2011
- Laser safety IEC 60825-1:2007
- Absolute accuracy ± 25 mm
- Repeat accuracy < 5 mm
- Product standard EN 60947-5-2
- Switching frequency 50 Hz
- Response time 10 ms
- Switching current max. 100 mA
- Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
- Time delay before availability 1.5 s
- Switching voltage max. 30 V DC
- Operating voltage 10 ... 30 V DC , class 2
- No-load supply current ≤ 125 mA / 24 V DC
- Ripple 10 % within the supply tolerance
- Control elements 5-step rotary switch for operating modes selection (threshold setting and operating modes)
- Teach-In indicator Teach-In: LED green/yellow equiphase flashing; 2.5 Hz, Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
- Function indicator 2 LEDs yellow for switching state
- MTTFd 200 a
- Operation indicator LED green
- Measuring method Pulse Ranging Technology (PRT)
- Mission Time (TM) 10 a
- Diagnostic Coverage (DC) 0 %
- Diameter of the light spot < 15 mm at a distance of 15 m at 20 °C
- Angle deviation max. ± 2°
- Ambient light limit 50000 Lux
- Temperature influence typ. ≤ 0.25 mm/K
- Repetition rate 250 kHz
- Pulse length approx. 4 ns
- max. pulse energy < 1.5 nJ
- Note LASER LIGHT , DO NOT STARE INTO BEAM
- Light source laser diode, typ. service life 85,000 h at Ta = +25 °C
- Light type modulated visible red light
- Beam divergence 1 mrad
- Laser class 1
- Measurement range 0.2 ... 15 m
- Wave length 660 nm
- Reference target Kodak white (90%)
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents VDM28-15-L1/73C/136 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨