OQT400-R201-2EP-IO-0,3M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Mass
  approx. 51 g
• Cable length
  0.3 m
• Housing
  PC (Polycarbonate)
• Connection
  fixed cable 300 mm with M8 x 1 male connector; 4-pin
• Degree of protection
  IP67 / IP69 / IP69K
• Housing height
  61.7 mm
• Optical face
  PMMA
• Housing depth
  41.7 mm
• Housing width
  15 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Communication interface
  IEC 61131-9
• Product standard
  EN 60947-5-2
• Usage category
  DC-12 and DC-13
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Response time
  2.3 ms
• Switching frequency
  217 Hz
• Switching current
  max. 100 mA , resistive load
• Voltage drop
  ≤ 1.5 V DC
Min. cycle time
2.3 ms
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
Switching voltage
max. 30 V DC
Compatible master port type
A
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
SIO mode support
yes
Process data width
Process data input 2 Bit, Process data output 2 Bit
Device ID
0x111811 (1120273)
Transfer rate
COM2 (38.4 kBit/s)
IO-Link revision
1.1
Protection class
III
Interface type
IO-Link ( via C/Q = pin 4 )
Device profile
Identification and diagnosis, Smart Sensor type 0
No-load supply current
< 25 mA at 24 V supply voltage
Ripple
max. 10 %
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Mission Time (TM)
20 a
Operating voltage
10 ... 30 V DC
Control elements
Teach-In key
Opening angle
approx. 2.5 °
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
MTTFd
600 a
Diagnostic Coverage (DC)
0 %
Diameter of the light spot
approx. 15 mm at a distance of 400 mm
Ambient light limit
EN 60947-5-2 : 70000 Lux
Black-white difference (6 %/90 %)
< 5 %, ,
Light source
LED
Adjustment range
100 ... 400 mm
Detection range
40 ... 400 mm
LED risk group labelling
exempt group
Detection range min.
40 ... 100 mm
Detection range max.
40 ... 400 mm
Light type
modulated visible red light
Reference target
standard white, 100 mm x 100 mm

Related documents OQT400-R201-2EP-IO-0,3M-V31 Specs