OQT400-R201-2EP-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Cable length
  0.3 m
• Optical face
  PMMA
• Housing
  PC (Polycarbonate)
• Mass
  approx. 55 g
• Degree of protection
  IP67 / IP69 / IP69K
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Housing depth
  41.7 mm
• Housing height
  61.7 mm
• Housing width
  15 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Product standard
  EN 60947-5-2
• Communication interface
  IEC 61131-9
• Response time
  2.3 ms
• Switching frequency
  217 Hz
• Usage category
  DC-12 and DC-13
• Voltage drop
  ≤ 1.5 V DC
• Switching current
  max. 100 mA , resistive load
Switching voltage
max. 30 V DC
Compatible master port type
A
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Process data width
Process data input 2 Bit, Process data output 2 Bit
SIO mode support
yes
Min. cycle time
2.3 ms
Protection class
III
Device ID
0x111811 (1120273)
No-load supply current
< 25 mA at 24 V supply voltage
Device profile
Identification and diagnosis, Smart Sensor type 0
Transfer rate
COM2 (38.4 kBit/s)
Ripple
max. 10 %
Interface type
IO-Link ( via C/Q = pin 4 )
IO-Link revision
1.1
Operating voltage
10 ... 30 V DC
Control elements
Teach-In key
MTTFd
600 a
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Ambient light limit
EN 60947-5-2 : 70000 Lux
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Opening angle
approx. 2.5 °
Diagnostic Coverage (DC)
0 %
Mission Time (TM)
20 a
Diameter of the light spot
approx. 15 mm at a distance of 400 mm
LED risk group labelling
exempt group
Light source
LED
Black-white difference (6 %/90 %)
< 5 %, ,
Adjustment range
100 ... 400 mm
Light type
modulated visible red light
Detection range
40 ... 400 mm
Detection range max.
40 ... 400 mm
Detection range min.
40 ... 100 mm
Reference target
standard white, 100 mm x 100 mm

Related documents OQT400-R201-2EP-IO-0,3M-V1 Specs