OQT400-R200-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Optical face
  PMMA
• Mass
  approx. 73 g
• Connection
  2 m fixed cable
• Cable length
  2 m
• Degree of protection
  IP67 / IP69 / IP69K
• Housing
  PC (Polycarbonate)
• Housing depth
  41.7 mm
• Housing height
  50.6 mm
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Product standard
  EN 60947-5-2
• Housing width
  15 mm
• Communication interface
  IEC 61131-9
• EAC conformity
  TR CU 020/2011
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Response time
  2.3 ms
• Detection range min.
  40 ... 100 mm
• Switching frequency
  217 Hz
• Voltage drop
  ≤ 1.5 V DC
Black-white difference (6 %/90 %)
< 5 %, ,
Switching current
max. 100 mA , resistive load
Usage category
DC-12 and DC-13
Light type
modulated visible red light
Switching voltage
max. 30 V DC
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Reference target
standard white, 100 mm x 100 mm
Light source
LED
Switching type
The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link, Q2 - WH: NPN normally open, PNP normally closed
Compatible master port type
A
Process data width
Process data input 2 Bit, Process data output 2 Bit
Adjustment range
100 ... 400 mm
Min. cycle time
2.3 ms
SIO mode support
yes
LED risk group labelling
exempt group
Transfer rate
COM2 (38.4 kBit/s)
Device profile
Identification and diagnosis, Smart Sensor type 0
Device ID
0x111801 (1120257)
Interface type
IO-Link ( via C/Q = BK )
IO-Link revision
1.1
Protection class
III
Ripple
max. 10 %
No-load supply current
< 25 mA at 24 V supply voltage
Operating voltage
10 ... 30 V DC
Control elements
Teach-In key
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Detection range max.
40 ... 400 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Detection range
40 ... 400 mm
Diagnostic Coverage (DC)
0 %
Mission Time (TM)
20 a
MTTFd
600 a
Ambient light limit
EN 60947-5-2 : 70000 Lux
Opening angle
approx. 2.5 °
Diameter of the light spot
approx. 15 mm at a distance of 400 mm

Related documents OQT400-R200-2EP-IO Specs