KFD0-TT-EX1 Pepperl + Fuchs Electronic Components
Part#:KFD0-TT-EX1
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Thermocouple Converter, 1-channel isolated barrier, 24 V DC supply (loop powered), Thermocouple input, Output 4 mA ... 20 mA, Internal cold junction compensation, Sensor breakage detection, DIP switch selectable ranges, Housing width: 20 mm, Number of cha
Check out the KFD0-TT-EX1 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Maximum safe voltage 60 V (Attention! The rated voltage can be lower.)
- Certificate TÜV 01 ATEX 1777 X
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- Power 3.2 mW
- Voltage 16.1 V
- Control drawing 116-0132
- Marking II (1)GD [EEx ia] IIC
- EU-type examination certificate ZELM 00 ATEX 0035
- Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Mass approx. 150 g
- Dimensions 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
- Galvanic isolation EN 50178
- Insulation coordination EN 50178
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Degree of protection IEC 60529
- Labeling space for labeling at the front
- Configuration via DIP switches, via rotary switch
- Control elements DIP switch, rotary switch
- Input/Output safe isolation according to EN 50178, rated insulation voltage 253 Veff
- Rise time 250 ms
- Characteristic curve the output voltage is linearly proportionate to the input voltage (not to temperature)
- After calibration 0.1 % of full-scale value ± 1 K for the cold junction
- Temperature effect temperature deviation 0.015 % of the span/K or 1.5 µV/K cold junction ± 2 K (calibrated at Tamb= 20 °C (68 °F))
- Influence of supply voltage 6.5 ppm/V
- Measurement range span 4 ... 100 mV, zero point -12 ... 60 mV , both adjustable
- Fault signal downscaling ≤ 3 mA , upscaling ≥ 22 mA
- Connection terminals 1+, 2-, 3- thermocouple E, J, K, N, R, S or T, cold junction referenced to 0 °C (32 °F)
- Power dissipation 0.4 W
- Signal type Analog input
- Current output 4 ... 20 mA , limited to ≤ 35 mA
- Load (U -12 V) / 0.02 A
- Lead resistance max. 100 Ω per line
- Connection side field side
- Current lead monitoring ON: ≤ 15 nA; OFF: ≤ 1 nA
- Rated voltage 12 ... 35 V DC loop powered
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KFD0-TT-EX1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨