KFD0-RO-EX2 Pepperl + Fuchs Electronic Components
Part#:KFD0-RO-EX2
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Relay Module, 2-channel isolated barrier, 24 V DC supply (loop powered), Logic input 15 V DC ... 30 V DC, non-polarized, Relay contact output, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (S
Check out the KFD0-RO-EX2 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
- IECEx certificate IECEx BVS 10.0025
- Control drawing 116-0261
- Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
- Maximum safe voltage 40 V DC (Attention! Umis no rated voltage.)
- Certificate TÜV 00 ATEX 1621 X
- Current 2 A
- Marking II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I
- Voltage 60 V
- EU-type examination certificate DMT 00 ATEX E 016
- Output Ex ia
- Dimensions 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Electromagnetic compatibility NE 21:2006
- Degree of protection IEC 60529:2001
- Directive 2014/35/EU EN 61010-1:2010
- Mass approx. 100 g
- Ambient temperature -20 ... 65 °C (-4 ... 149 °F)
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Labeling space for labeling at the front
- Contact loading 230 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load
- Display elements LEDs
- Switching frequency < 10 Hz
- Output/Output basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Input/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Mechanical life 5 x 106switching cycles
- Input voltage 15 ... 30 V DC
- Input current ≤ 21 mA per channel
- Energized/De-energized delay approx. 10 ms / approx. 5 ms
- Connection terminals 7, 8, 9
- Safety note Attention! Combination of output Ex i with outputnotEx i isnotpermitted., If load voltage > 50 V, de-energize before removing the terminals.
- Safety Integrity Level (SIL) SIL 3
- Rated voltage loop powered
- Power dissipation 0.8 W
- Connection side control side
- Signal type Digital Output
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KFD0-RO-EX2 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨