KFD0-SD2-EX1.1180 Pepperl + Fuchs Electronic Components
Part#:KFD0-SD2-EX1.1180
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Solenoid Driver, 1-channel isolated barrier, 24 V DC supply (loop powered), Current limit 80 mA at 11 V DC, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 3, Rated voltage: loop pow
Check out the KFD0-SD2-EX1.1180 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I, Ex ec IIC T4 Gc
- Control drawing 116-0309
- IECEx certificate IECEx BAS 06.0058, IECEx CML 19.0093X
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
- Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
- EU-type examination certificate BASEEFA 06 ATEX 0252
- Certificate TÜV 99 ATEX 1499 X
- Power 1159 mW
- Marking II (1)G [Ex ia Ga] IIB, II (1)D [Ex ia Da] IIIB, I (M1) [Ex ia Ma] I (-20 °C ≤ Tamb≤ 60 °C)
- Protection against electrical shock UL 61010-1:2004
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Maximum safe voltage 250 V (Attention! The rated voltage can be lower.)
- Dimensions 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
- Electromagnetic compatibility NE 21:2006
- Output rated operating current 80 mA
- Degree of protection IEC 60529:2001
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
- Display elements LED
- Labeling space for labeling at the front
- Open loop voltage min. 22.7 V
- Mass approx. 100 g
- Energized/De-energized delay single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs
- Output signal These values are valid for the rated operating voltage 20 ... 35 V DC.
- Safety Integrity Level (SIL) SIL 3
- Power dissipation < 1 W (≤ 30 V)
- Current 140 mA at 20 V input voltage, load = 140 Ω, 100 mA at 35 V input voltage, load = 140 Ω
- Connection terminals 7, 8
- Connection side control side
- Internal resistor ≤ 150 Ω
- Voltage ≥ 11 V
- Signal type Digital Output
- Rated voltage loop powered
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KFD0-SD2-EX1.1180 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨