8118292 Festo Electric Actuators
Part#:8118292
Manufacturer:Festo
Alt. Part#:EPCS-BS-60-300-5P-A-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
About the product: electric cylinder unit EPCS-BS-60-300-5P-A-ST-M-H1-PLK-AA Size: 60, Stroke: 300 mm, Stroke reserve: 0 mm, Piston rod thread: M12x1,25, Reversing backlash: 100 µm
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8118292 Festo price in the box on the right side or send a quick quote.
8118292 Product Details
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Logic input specification Based on IEC 61131-2, type 1
- Input switching logic NPN (negative switching) PNP (positive switching)
- Logic interface, connection pattern 00992264
- DC nominal voltage 24 V
- Max. current consumption 5300 mA
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, communication mode COM3 (230.4 kBd)
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Parameterization interface IO-Link® User interface
- Power supply, connection pattern 00995989
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Number of digital logic outputs 24 V DC 2
- Work range of logic input 24 V
- IO-Link®, process data width IN 2 Byte
- IO-Link®, minimum cycle time 1 ms
- Size 60
- Max. angle of rotation of the piston rod +/- 1 deg
- Type code EPCS
- Design Electric actuator With integrated drive
- Repetition accuracy ±0.02 mm
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature 0 °C ... 50 °C
- Max. torque Mz 6.4 Nm
- Max. feed force Fx 900 N
- Additional moving mass per 10 mm stroke 6.5 g
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Additional functions User interface Integrated end-position sensing
- Characteristics of logic input Configurable Not galvanically isolated
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Logic interface, connection type Plug
- Power supply, number of pins/wires 4
- Product weight 4364 g
- Nominal current 5.3 A
- IO-Link®, protocol version Device V 1.1
- Stroke 300 mm
- Spindle pitch 5 mm/U
- Mounting position Any
- Protection against torsion/guide With plain-bearing guide
- Homing Fixed stop block positive Reference switch
- Insulation protection class B
- Certification RCM compliance mark
- Max. radial force on actuator shaft 230 N
- Piston rod material High-alloy stainless steel
- Reversing backlash 100 µm
- Screw diameter 12 mm
- Switching logic at outputs NPN (negative switching) PNP (positive switching)
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Max. current of digital logic outputs 100 mA
- Logic interface, number of poles/wires 8
- Rotor position sensor resolution 16 bit
- IO-Link®, port class A
- IO-Link®, number of ports 1
- IO-Link®, data memory required 500 byte
- Stroke reserve 0 mm
- Piston rod end External thread
- Spindle type Ball screw drive
- Max. speed 0.09 m/s
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Storage temperature -20 °C ... 60 °C
- Guide value for payload, horizontal 120 kg
- Moving mass at 0 mm stroke 305 g
- Spindle nut material Steel
- KC characters KC EMC
- Display LED
- Ready status indication LED
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Power supply, type of connection Plug
- Number of digital logic inputs 2
- IO-Link®, SIO mode support Yes
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Piston rod thread M12x1.25
- Motor type Stepper motor
- Rotor position sensor Absolute encoder, single-turn
- Duty cycle 100%
- Relative air humidity 0 - 90 % Non-condensing
- Degree of protection IP40
- Max. torque My 6.4 Nm
- Guide value for payload, vertical 46 kg
- Basic weight with 0 mm stroke 2294 g
- Type of mounting With internal thread With accessories
- Spindle material Roller bearing steel
- Symbol 00997294
- Rotor position sensor measuring principle Magnetic
- Max. acceleration 1.5 m/s²
- Permissible voltage fluctuations +/- 15 %
- Max. torque Mx 0 Nm
- Additional weight per 10 mm stroke 69 g
- Housing material Wrought aluminum alloy, smooth-anodized
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8118292 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8118292
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨