8118268 Festo Electric Actuators

8118268 Product Details

• KC characters
  KC EMC
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Ready status indication
  LED
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, connection type
  Plug
• Power supply, number of pins/wires
  4
• Rotor position sensor resolution
  16 bit
• IO-Link®, port class
  A
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Logic input specification
  Based on IEC 61131-2, type 1
• Additional functions
  User interface Integrated end-position sensing
• Power supply, connection pattern
  00995989
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Max. current of digital logic outputs
  100 mA
• Logic interface, number of poles/wires
  8
• Product weight
  1058 g
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, protocol version
  Device V 1.1
Size
32
Screw diameter
8 mm
Power supply, type of connection
Plug
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Max. current consumption
3000 mA
Nominal current
3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke reserve
0 mm
Spindle pitch
3 mm/U
Spindle type
Ball screw drive
Design
Electric actuator With integrated drive
Rotor position sensor measuring principle
Magnetic
Insulation protection class
B
Relative air humidity
0 - 90 % Non-condensing
Ambient temperature
0 °C ... 50 °C
Guide value for payload, horizontal
24 kg
Display
LED
Input switching logic
NPN (negative switching) PNP (positive switching)
Characteristics of logic input
Configurable Not galvanically isolated
DC nominal voltage
24 V
Number of digital logic inputs
2
IO-Link®, SIO mode support
Yes
IO-Link®, minimum cycle time
1 ms
IO-Link®, data memory required
500 byte
Parameterization interface
IO-Link® User interface
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection pattern
00992264
Number of digital logic outputs 24 V DC
2
Work range of logic input
24 V
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
Piston rod thread
M8
Type code
EPCS
Motor type
Stepper motor
Homing
Fixed stop block positive Reference switch
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. torque Mx
0 Nm
Max. radial force on actuator shaft
75 N
Guide value for payload, vertical
12 kg
Housing material
Wrought aluminum alloy, smooth-anodized
IO-Link®, number of ports
1
Stroke
100 mm
Max. angle of rotation of the piston rod +/-
1 deg
Symbol
00997294
Max. speed
0.079 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. torque Mz
1.5 Nm
Basic weight with 0 mm stroke
818 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle nut material
Steel
Reversing backlash
100 µm
Mounting position
Any
Protection against torsion/guide
With plain-bearing guide
Max. acceleration
1.5 m/s²
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. feed force Fx
150 N
Type of mounting
With internal thread With accessories
Piston rod end
External thread
Rotor position sensor
Absolute encoder, single-turn
Duty cycle
100%
Storage temperature
-20 °C ... 60 °C
Max. torque My
1.5 Nm
Additional weight per 10 mm stroke
24 g
Additional moving mass per 10 mm stroke
3.3 g
Spindle material
Roller bearing steel
Moving mass at 0 mm stroke
98 g
Piston rod material
High-alloy stainless steel

Product condition

Related documents 8118268 Specs