8118273 Festo Electric Actuators

8118273 Product Details

• Display
  LED
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic interface, connection type
  Plug
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Logic input specification
  Based on IEC 61131-2, type 1
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, type of connection
  Plug
• Number of digital logic outputs 24 V DC
  2
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Reversing backlash
  100 µm
• Type code
  EPCS
• Homing
  Fixed stop block positive Reference switch
• Duty cycle
  100%
• Permissible voltage fluctuations
  +/- 15 %
• Relative air humidity
  0 - 90 % Non-condensing
• Max. torque Mx
  0 Nm
Guide value for payload, vertical
9 kg
Guide value for payload, horizontal
24 kg
Housing material
Wrought aluminum alloy, smooth-anodized
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Ready status indication
LED
Power supply, connection pattern
00995989
DC nominal voltage
24 V
Max. current consumption
3000 mA
Rotor position sensor resolution
16 bit
IO-Link®, port class
A
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, data memory required
500 byte
Piston rod thread
M8
Mounting position
Any
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor measuring principle
Magnetic
Storage temperature
-20 °C ... 60 °C
Max. feed force Fx
150 N
Additional moving mass per 10 mm stroke
3.3 g
Spindle material
Roller bearing steel
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic inputs
2
Product weight
1178 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
Stroke reserve
0 mm
Piston rod end
External thread
Motor type
Stepper motor
Rotor position sensor
Absolute encoder, single-turn
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Max. torque Mz
1.5 Nm
Moving mass at 0 mm stroke
98 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Additional functions
User interface Integrated end-position sensing
Parameterization interface
IO-Link® User interface
Logic interface, connection pattern
00992264
Max. current of digital logic outputs
100 mA
Power supply, number of pins/wires
4
Nominal current
3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, number of ports
1
Stroke
150 mm
Max. angle of rotation of the piston rod +/-
1 deg
Design
Electric actuator With integrated drive
Max. acceleration
5 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Logic interface, number of poles/wires
8
Work range of logic input
24 V
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
Size
32
Spindle pitch
8 mm/U
Screw diameter
8 mm
Symbol
00997294
Spindle type
Ball screw drive
Max. speed
0.21 m/s
Repetition accuracy
±0.02 mm
Insulation protection class
B
Certification
RCM compliance mark
Max. torque My
1.5 Nm
Additional weight per 10 mm stroke
24 g
Type of mounting
With internal thread With accessories
Piston rod material
High-alloy stainless steel
Max. radial force on actuator shaft
75 N
Basic weight with 0 mm stroke
818 g
Spindle nut material
Steel

Product condition

Related documents 8118273 Specs