8118271 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Display
  LED
• Parameterization interface
  IO-Link® User interface
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• DC nominal voltage
  24 V
• IO-Link®, SIO mode support
  Yes
• Power supply, connection pattern
  00995989
• Power supply, type of connection
  Plug
• Logic interface, number of poles/wires
  8
• Max. current consumption
  3000 mA
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Piston rod thread
  M8
• Piston rod end
  External thread
• Spindle type
  Ball screw drive
• Homing
  Fixed stop block positive Reference switch
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Max. torque Mx
0 Nm
Guide value for payload, horizontal
24 kg
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. cable length
15 m outputs 20 m for IO-Link® operation
Ready status indication
LED
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection type
Plug
Number of digital logic outputs 24 V DC
2
Work range of logic input
24 V
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
IO-Link®, minimum cycle time
1 ms
Stroke reserve
0 mm
Max. angle of rotation of the piston rod +/-
1 deg
Design
Electric actuator With integrated drive
Max. speed
0.21 m/s
Corrosion resistance class (CRC)
0 - No corrosion stress
Relative air humidity
0 - 90 % Non-condensing
Max. torque My
1.5 Nm
Additional weight per 10 mm stroke
24 g
Piston rod material
High-alloy stainless steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Max. current of digital logic outputs
100 mA
Nominal current
3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, data memory required
500 byte
Spindle pitch
8 mm/U
Motor type
Stepper motor
Repetition accuracy
±0.02 mm
Rotor position sensor
Absolute encoder, single-turn
Permissible voltage fluctuations
+/- 15 %
Max. radial force on actuator shaft
75 N
Moving mass at 0 mm stroke
98 g
Type of mounting
With internal thread With accessories
Spindle material
Roller bearing steel
Logic input specification
Based on IEC 61131-2, type 1
Additional functions
User interface Integrated end-position sensing
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic inputs
2
Power supply, number of pins/wires
4
Product weight
938 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Size
32
Reversing backlash
100 µm
Mounting position
Any
Symbol
00997294
Max. acceleration
5 m/s²
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Max. torque Mz
1.5 Nm
Guide value for payload, vertical
9 kg
Basic weight with 0 mm stroke
818 g
Spindle nut material
Steel
IO-Link®, number of ports
1
Stroke
50 mm
Screw diameter
8 mm
Type code
EPCS
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor measuring principle
Magnetic
Insulation protection class
B
Storage temperature
-20 °C ... 60 °C
Certification
RCM compliance mark
Max. feed force Fx
150 N
Additional moving mass per 10 mm stroke
3.3 g
Housing material
Wrought aluminum alloy, smooth-anodized

Related documents 8118271 Specs