8083666 Festo Electric Actuators

8083666 Product Details

• Rotor position sensor
  Absolute encoder, single-turn
• Position sensing
  Motor encoder For proximity sensor
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Guide value for payload, horizontal
  2.5 kg
• Work range of logic input
  24 V
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, protocol version
  Device V 1.1
• Working stroke
  300 mm
• Toothed belt elongation
  0.187 %
• Parameterization interface
  IO-Link® User interface
• KC characters
  KC EMC
• Relative air humidity
  0 - 90 %
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Switching logic at outputs
  PNP (positive switching)
• Logic interface, connection type
  Plug
• Power supply, type of connection
  Plug
• Max. current of digital logic outputs
  100 mA
• Rotor position sensor resolution
  16 bit
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
Size
45
Mounting position
Horizontal
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Logic input specification
Based on IEC 61131-2, type 1
Insulation protection class
B
Permissible voltage fluctuations
+/- 15 %
Input switching logic
PNP (positive switching)
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Drive pinion effective diameter
19.1 mm
Max. cable length
15 m outputs 20 m for IO-Link® operation
Homing
Fixed stop block positive Fixed stop block, negative
Display
LED
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Power supply, number of pins/wires
4
Storage temperature
-20 °C ... 60 °C
Max. torque Mz
4.7 Nm
Rotor position sensor measuring principle
Magnetic
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic inputs
2
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Protection class
III
IO-Link®, data memory required
500 byte
Type code
ELGS
Symbol
00997293
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. torque My
4.7 Nm
Max. feed force Fx
75 N
Drive cover material
Die cast aluminum, painted
Slide material
Die-cast aluminum
Power supply, connection pattern
00995989
Number of digital logic outputs 24 V DC
2
Logic interface, number of poles/wires
8
Nominal current
5.3 A
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
IO-Link®, number of ports
1
Stroke reserve
0 mm
Design
Electromechanical linear axis With integrated drive
Additional functions
User interface Integrated end-position sensing
Repetition accuracy
±0.1 mm
Degree of protection
IP40
Moving mass at 0 mm stroke
169 g
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, Connection technology
Plug
Toothed belt pitch
2 mm
Motor type
Stepper motor
Max. acceleration
6 m/s²
Certification
RCM compliance mark
Max. force Fy
300 N
Max. torque Mx
5.5 Nm
Guide
Recirculating ball bearing guide
Max. speed
1.2 m/s
Ambient temperature
0 °C ... 50 °C
2nd moment of area Iz
170000 mm⁴
Torsion moment of inertia It
8500 mm⁴
Moving mass
169 g
Profile material
Wrought aluminum alloy, anodized
Slide carriage material
Tempered steel
Duty cycle
100%
2nd moment of area Iy
140000 mm⁴
Max. force Fz
600 N
Slide weight
55 g
Guide rail material
Tempered steel
Feed constant
60 mm/U
Product weight
2480 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Belt pulley material
High-alloy stainless steel
Cover strip material
Stainless steel strip
Material of end caps
Die cast aluminum, painted
Toothed belt material
Polychloroprene with glass fiber

Product condition

Related documents 8083666 Specs