8083665 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Logic input specification
  Based on IEC 61131-2, type 1
• Permissible voltage fluctuations
  +/- 15 %
• Display
  LED
• Power supply, connection pattern
  00995989
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Homing
  Fixed stop block positive Fixed stop block, negative
• Position sensing
  Motor encoder For proximity sensor
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Relative air humidity
  0 - 90 %
• Rotor position sensor measuring principle
  Magnetic
• Switching logic at outputs
  PNP (positive switching)
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, type of connection
  Plug
• Number of digital logic outputs 24 V DC
  2
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• Protection class
  III
IO-Link®, Connection technology
Plug
Stroke reserve
0 mm
Toothed belt pitch
2 mm
Symbol
00997293
Max. acceleration
6 m/s²
Duty cycle
100%
2nd moment of area Iy
140000 mm⁴
Max. force Fz
600 N
Moving mass
169 g
Insulation protection class
B
Parameterization interface
IO-Link® User interface
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection type
Plug
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Mounting position
Horizontal
Motor type
Stepper motor
Additional functions
User interface Integrated end-position sensing
Ambient temperature
0 °C ... 50 °C
Max. torque Mx
5.5 Nm
Drive pinion effective diameter
19.1 mm
Rotor position sensor
Absolute encoder, single-turn
Input switching logic
PNP (positive switching)
Ready status indication
LED
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic inputs
2
Logic interface, number of poles/wires
8
Nominal current
5.3 A
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
Toothed belt elongation
0.187 %
Design
Electromechanical linear axis With integrated drive
Repetition accuracy
±0.1 mm
Certification
RCM compliance mark
Max. feed force Fx
75 N
Slide weight
55 g
Slide material
Die-cast aluminum
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, connection pattern
00992264
Power supply, number of pins/wires
4
Storage temperature
-20 °C ... 60 °C
Max. current consumption
5300 mA
IO-Link®, protocol version
Device V 1.1
Size
45
Type code
ELGS
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Degree of protection
IP40
Max. force Fy
300 N
Max. torque Mz
4.7 Nm
Moving mass at 0 mm stroke
169 g
Cover strip material
Stainless steel strip
Guide value for payload, horizontal
2.5 kg
DC nominal voltage
24 V
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
Working stroke
200 mm
Guide
Recirculating ball bearing guide
Max. speed
0.96 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
2nd moment of area Iz
170000 mm⁴
Max. torque My
4.7 Nm
Feed constant
60 mm/U
Material of end caps
Die cast aluminum, painted
Drive cover material
Die cast aluminum, painted
Torsion moment of inertia It
8500 mm⁴
Product weight
2250 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Guide rail material
Tempered steel
Toothed belt material
Polychloroprene with glass fiber
Profile material
Wrought aluminum alloy, anodized
Slide carriage material
Tempered steel
Belt pulley material
High-alloy stainless steel

Related documents 8083665 Specs