8083577 Festo Electric Actuators

8083577 Product Details

• Drive pinion effective diameter
  24.83 mm
• Insulation protection class
  B
• Homing
  Fixed stop block positive Fixed stop block, negative
• Rotor position sensor measuring principle
  Magnetic
• Ready status indication
  LED
• Logic interface, connection type
  Plug
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic input specification
  Based on IEC 61131-2, type 1
• Permissible voltage fluctuations
  +/- 15 %
• Relative air humidity
  0 - 90 %
• Position sensing
  Motor encoder For proximity sensor
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, type of connection
  Plug
• Logic interface, number of poles/wires
  8
• DC nominal voltage
  24 V
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• IO-Link®, protocol version
  Device V 1.1
• Working stroke
  1500 mm
Type code
ELGS
Design
Electromechanical linear axis With integrated drive
Repetition accuracy
±0.1 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fz
1800 N
Max. torque Mz
31.8 Nm
Moving mass
482 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Cover strip material
Stainless steel strip
Rotor position sensor
Absolute encoder, single-turn
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Display
LED
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Work range of logic input
24 V
Max. current consumption
5300 mA
Nominal current
5.3 A
IO-Link®, process data width OUT
2 Byte
IO-Link®, data memory required
500 byte
Size
60
Guide
Recirculating ball bearing guide
Feed constant
78 mm/U
Product weight
9405 g
Drive cover material
Die cast aluminum, painted
Toothed belt material
Polychloroprene with glass fiber
KC characters
KC EMC
Max. cable length
15 m outputs 20 m for IO-Link® operation
Input switching logic
PNP (positive switching)
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Number of digital logic inputs
2
Guide value for payload, horizontal
4 kg
Rotor position sensor resolution
16 bit
IO-Link®, SIO mode support
Yes
Protection class
III
IO-Link®, Connection technology
Plug
Toothed belt pitch
3 mm
Motor type
Stepper motor
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Max. speed
1.3 m/s
Duty cycle
100%
Certification
RCM compliance mark
Max. torque Mx
29.1 Nm
Max. feed force Fx
65 N
Profile material
Wrought aluminum alloy, anodized
Guide rail material
Tempered steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Parameterization interface
IO-Link® User interface
Switching logic at outputs
PNP (positive switching)
Power supply, connection pattern
00995989
Logic interface, connection pattern
00992264
Power supply, number of pins/wires
4
IO-Link®, process data width IN
2 Byte
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, number of ports
1
Toothed belt elongation
0.124 %
Symbol
00997293
Max. acceleration
6 m/s²
Degree of protection
IP40
2nd moment of area Iy
441000 mm⁴
2nd moment of area Iz
542000 mm⁴
Max. torque My
31.8 Nm
Slide weight
139 g
Slide carriage material
Tempered steel
Belt pulley material
High-alloy stainless steel
Number of digital logic outputs 24 V DC
2
Max. current of digital logic outputs
100 mA
Storage temperature
-20 °C ... 60 °C
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, port class
A
Stroke reserve
0 mm
Mounting position
Horizontal
Additional functions
User interface Integrated end-position sensing
Ambient temperature
0 °C ... 50 °C
Max. force Fy
600 N
Torsion moment of inertia It
29800 mm⁴
Moving mass at 0 mm stroke
482 g
Material of end caps
Die cast aluminum, painted
Slide material
Die-cast aluminum

Product condition

Related documents 8083577 Specs